- Written by Nandan Saha
- Posted on 8月 24, 2020
- Updated on 5月 22, 2024
- 11488 Views
The BGP-LS extension allows IGPs (OSPF/IS-IS) link state database information to be injected into BGP. This is typically used in deployments where some external component, (like a controller or Path Computation Engine) can do centralized path computations by learning the entire IGP topology through BGP-LS. The controller can then communicate the computed paths based on the BGP-LS updates to the head end device in the network. The mechanism used by the controller to communicate the computed TE paths is outside the scope of this document. Using BGP-LS instead of an IGP peering with the controller to distribute IGP link state information has the following advantages.
- Written by Denis Evoy
- Posted on 10月 24, 2024
- Updated on 10月 24, 2024
- 403 Views
Normally, an ingress router has no control over an autonomous system border router’s (ASBR) selection of inter-AS links. In the example below, Peer 2 and Peer 3 both advertise reachability to some remote network to ASBR 1 (e.g. service route 172.16.1.0/24). ASBR 1 would then use normal bestpath selection rules to select a preferred egress path (for traffic flowing to that service route). However, this means that the ingress router has no control over which egress path is chosen.