- Written by Sarah Chen
- Posted on 10月 9, 2019
- Updated on 10月 9, 2019
- 2605 Views
The General Router ID configuration provides the ability to configure a common Router ID for all routing protocols
- Written by Azad Kumar
- Posted on 1月 3, 2023
- Updated on 1月 3, 2023
- 750 Views
ISIS Leaked Route Summarization is a feature which summarizes all the L1 leaked routes in L2 routers. With the help of this L2 LSP size reduces (smaller no of routes in L2 LSP).
- Written by Vivek Ilangovan
- Posted on 11月 12, 2019
- Updated on 11月 12, 2019
- 2134 Views
This feature implements support for RFC6232 that helps a user identify source of an LSP purge packet. It can be enabled
- Written by Arpit Bansal
- Posted on 8月 18, 2020
- Updated on 8月 18, 2020
- 2277 Views
Level 1 2 routers set attached bit in their Level 1 LSPs to indicate their reachability to the rest of the network. A
- Written by Romi Kumar
- Posted on 8月 16, 2018
- Updated on 2月 6, 2022
- 2349 Views
This feature allows user to configure adjacency SID of global scope for IS IS adjacencies. It is an extension to IS IS
- Written by Shimang Kumar
- Posted on 6月 19, 2022
- Updated on 6月 20, 2022
- 1554 Views
This feature enables the support of maximum SID depth advertisement by the IS-IS protocol in its LSPDB as defined in RFC8491, with this feature adding support for one type of MSD: Base MPLS Imposition (BMI-MSD).
- Written by Deeksha Srivastava
- Posted on 4月 16, 2020
- Updated on 4月 22, 2020
- 2716 Views
When there are multiple VRFs on the device and there is a need to share routes between them, typically for shared
- Written by Deeksha Srivastava
- Posted on 6月 3, 2020
- Updated on 6月 3, 2020
- 2869 Views
VRF Route leaking can be used when routes from one VRF are required in another VRF (e.g. in case of shared services). If
- Written by Hariram Natarajan
- Posted on 1月 16, 2020
- Updated on 1月 17, 2020
- 2121 Views
Configuring the IGP cost for tunnels is a feature that allows influencing the BGP best path selection for routes