- Written by Thomas Altenburger
- Posted on 1月 20, 2022
- Updated on 8月 27, 2024
- 9116 Views
NAT (Network Address Translation) is a feature that allows each packet's addresses to be rewritten according to the user configuration. The packet qualification happens within the ingress pipeline of the forwarding plane, then the egress pipeline uses a shared table memory to decide which fields to adapt.
- Written by Freedom Garcia
- Posted on 11月 5, 2021
- Updated on 8月 30, 2024
- 7501 Views
Non default VRF support is now available for Static unicast NAT. Twice NAT. Dynamic NAT. VRF support
- Written by Ram Murthy
- Posted on 3月 3, 2023
- Updated on 8月 27, 2024
- 7020 Views
NAT has been supported in DCS-7150 for many years. Starting at EOS 4.21.6F, NAT functionality is supported on certain 7050X3 platforms.
- Written by Corentin Le Bigot
- Posted on 9月 5, 2021
- Updated on 8月 29, 2024
- 7247 Views
Hardware accelerated NAT for transit fragmented traffic is enabled by default. It’s important to note that
- Written by Rajiv Patil
- Posted on 9月 16, 2020
- Updated on 8月 30, 2024
- 15268 Views
Dynamic NAT is a feature which dynamically allocates an IP address to an incoming or outgoing flow. This address will replace source or destination IP for all packets of the flow.
- Written by Nik Zaborovskii
- Posted on 12月 8, 2020
- Updated on 8月 29, 2024
- 10031 Views
Multicast NAT is a feature that performs NAT translations on multicast traffic. It can be configured under SVIs,
- Written by Brett Hatch
- Posted on 6月 5, 2020
- Updated on 8月 30, 2024
- 8108 Views
Static NAT rules may optionally include an access list to filter the packets to be translated.