Internal recirculation interfaces, IR interfaces, can be used to internally loop-back packets for a second pass through the packet forwarding pipeline. This is particularly useful with Tap Aggregation because some combinations of advanced Tap Aggregation features cannot be simultaneously applied to a packet. Using an IR interface however, a user can apply multiple Tap Aggregation egress editing features, overcoming previous limitations.

This article describes the Tap Aggregation MAC Address Replacement feature. This feature provides the ability to configure user-specific values to replace the destination and source MAC addresses of packets forwarded by Tap Aggregation.

As of EOS-4.25.2F some advanced Tap Aggregation features require the hardware forwarding profile to be set. On EOS-4.25.2F these features are MPLS Pop and 802.1br-E/VN Tag Stripping.

This article describes a feature for Tap Aggregation mode, which strips IEEE 802.1BR E-Tag and Cisco VN-Tag headers from all tagged packets received on tap interface before delivering them out of tool interfaces.