- Written by Sahil Midha
- Posted on 6月 14, 2019
- Updated on 10月 25, 2022
- 7937 Views
This feature can be divided into 3 parts. Enable support for different threshold per Color per TX queue We
- Written by Sahil Midha
- Posted on 12月 22, 2017
- Updated on 2月 6, 2022
- 8328 Views
Link Fault Signalling (LFS) is a mechanism by which remote link faults are asserted over a link experiencing
- Written by Sahil Midha
- Posted on 2月 8, 2017
- Updated on 2月 7, 2022
- 5903 Views
QoS profiles have been applicable on fabric and front panel ports across all platforms from EOS 4.17.0F release
- Written by Sahil Midha
- Posted on 6月 29, 2016
- Updated on 6月 29, 2016
- 6113 Views
The show command 'show qos interface fabric' was introduced for DCS 7250QX and DCS 7300X series starting EOS
- Written by Sahil Midha
- Posted on 6月 29, 2016
- Updated on 2月 7, 2022
- 6893 Views
Since, now there can be multiple inputs, conflicts may arise. Non conflicting configurations are when non default
- Written by Sahil Midha
- Posted on 5月 14, 2015
- Updated on 2月 5, 2022
- 5930 Views
Stream Control Transmission Protocol (132) is a transport layer protocol, much like TCP. After the IP header, a
- Written by Sahil Midha
- Posted on 5月 14, 2015
- Updated on 7月 3, 2024
- 1051 Views
For packets sent and received on the front-panel interfaces, this feature allows creation of a profile to configure buffer reservations in the MMU (MMU = Memory Management Unit which manages how the on-chip packet buffers are organized). The profile can contain configurations for ingress and egress. On the ingress, configuration is supported at both a port level as well as a priority-group level.
- Written by Sahil Midha
- Posted on 5月 1, 2015
- Updated on 5月 20, 2015
- 5135 Views
Permitting traffic during ACL updates has been available for traffic steering in tap aggregation mode since EOS