With the 13.0.1 release, you can authenticate wired hosts connected to the LAN ports of access points (W-118 and W-318) using 802.1X or MAC-based authentication. You can configure the authentication parameters for each downlink port on the access point (AP) using a LAN Port profile in CV-CUE. The communication happens either through a bridged network or transferred using L2 Tunnels.

With the 13.0.1 release, you can monitor wired hosts that are physically connected to access points (APs) through Ethernet cables. Currently, the W-118 AP and W-318 AP through their additional LAN ports support connecting hosts directly to the AP.