show l1 matrix
The show l1 matrix command displays the matrix representation of Layer 1 paths foravailable interfaces in the privileged EXEC mode.
Command Mode
Privileged EXEC
Command Syntax
show l1 matrix [all | interface | detail | physical]
Parameters
- all displays the matrix of Layer 1 paths for possible interface types even if they do not have a connection.
- interface displays the matrix of Layer 1 paths for
the specified interface.
- application Application FPGA connector interface.
- cpu CPU interface.
- ethernet Ethernet interface.
- switch Switch interface.
- detail displays the detailed matrix of Layer 1 paths.
- physical displays the Layer 1 matrix for physical interfaces only.
Examples
- This command displays the matrix of Layer 1 paths for all available
interface types.
switch> show l1 matrix Ethernet Switch App 1 3 4 1 17 1/1 1/2 | | | | | | | Et1 -> -|-|-|------+-|--------+ | Et2 -> -|-+-+ | | Sw17 -> -|------------|------------+ App1/1 -> -+ | App1/2 -> --------------+
- This command displays the matrix of Layer 1 paths for all available
interface types even if the interfaces do not have a connection.
switch> show l1 matrix all Ethernet Switch 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8 9 10 | | | | Et1 -> -|---|-|----------------------------------+ Et2 -> -|---+-+ Et3 -> | Et4 -> | Et5 -> | Et6 -> | Et7 -> | Et8 -> | Et9 -> | Et10 -> | Et11 -> | Et12 -> | Et13 -> | Et14 -> | Et15 -> | Et16 -> | Sw1 -> | Sw2 -> | Sw3 -> | Sw4 -> | Sw5 -> | Sw6 -> | Sw7 -> | Sw8 -> | Sw9 -> | Sw10 -> | Sw11 -> | Sw12 -> | Sw13 -> | Sw14 -> | Sw15 -> | Sw16 -> | Sw17 -> | App1/1 -> -+ App1/2 -> Cpu1 -> Cpu2 -> Switch App Cpu 11 12 13 14 15 16 17 1/1 1/2 1 2 | | | Et1 -> -------------------|----+ | Et2 -> | | Et3 -> | | Et4 -> | | Et5 -> | | Et6 -> | | Et7 -> | | Et8 -> | | Et9 -> | | Et10 -> | | Et11 -> | | Et12 -> | | Et13 -> | | Et14 -> | | Et15 -> | | Et16 -> | | Sw1 -> | | Sw2 -> | | Sw3 -> | | Sw4 -> | | Sw5 -> | | Sw6 -> | | Sw7 -> | | Sw8 -> | | Sw9 -> | | Sw10 -> | | Sw11 -> | | Sw12 -> | | Sw13 -> | | Sw14 -> | | Sw15 -> | | Sw16 -> | | Sw17 -> -------------------|--------+ App1/1 -> | App1/2 -> -------------------+ Cpu1 -> Cpu2 ->
- This command displays the matrix of Layer 1 paths for the specific Ethernet
interfaces et1 and et4.
switch> show l1 matrix interface et1, et4 Ethernet Switch App 1 4 1 1/1 | | | | Et1 -> -|-|--------+--------+ Et2 -> -|-+ App1/1 -> -+