Tag :: Ultra Low Latency

Agile ports allow users to connect 40G interfaces on 7130 products utilizing multiple SFP ports per 40G capable interface. This enables 40G capable applications, such as MetaConnect and MetaWatch, to operate at that speed.

Arista’s DCS-7130B series of switches are network devices designed for ultra low-latency applications along with a suite of networking features.

Arista’s DCS-7130LBR series of switches are powerful network devices designed for ultra latency applications along with a wealth of networking features.

Arista's 7130 Connect Series of Layer 1+ switches are powerful network devices that allow for dynamic connections between various layer 1 components on the system, such as the front panel, FPGA, and ASIC ports. 

Arista’s 7135 Connect Series of Layer 1+ switches are powerful network devices that allow for dynamic connections between various layer 1 components on the system, such as the front panel and FPGA. These connections are driven by an underlying CLOS network of crossbar switches. The following commands provide the ability to configure middle stage crossbar switches within the system to create dynamic layer 1 connections.

4.29.1F adds Latency Analyzer (LANZ) support to the Arista SwitchApp on 7130 series. LANZ monitors SwitchApp internal buffer congestion. When the number of bytes in a buffer is over a high threshold, a congestion start event is created. When the number of bytes in a buffer is below a low threshold, a congestion end event occurs. LANZ on SwitchApp does not report any congestion update as the buffer sizes are too small for it to be meaningful. As SwitchApp comes in different profiles, each profile has a different hardware behavior due to the underlying architectural difference.

Arista's 7130 Connect Series of Layer 1+ switches are powerful network devices designed for ultra low latency and offer a wealth of integrated management features and functionalities.

MetaMux is an FPGA-based feature available on Arista’s 7130 platforms. It performs ultra-low latency Ethernet packet multiplexing with or without packet contention queuing. The port to port latency is a function of the selected MetaMux profile, front panel ingress port, front panel egress port, FPGA connector ingress port, and platform being used.

MetaWatch is an FPGA-based feature available for Arista 7130 Series platforms. It provides precise timestamping of packets, aggregation and deep buffering for Ethernet links. Timestamp information and other metadata such as device and port identifiers are appended to the end of the packet as a trailer.

MultiAccess is an FPGA-based feature available on certain Arista 7130 platforms. It performs low-latency Ethernet multiplexing with optional packet contention queuing, storm control, VLAN tunneling, and packet access control. The interface to interface latency is a function of the selected MultiAccess profile, front panel interfaces, MultiAccess interfaces, configuration settings, and platform being used.

SwitchApp is an FPGA-based feature available on Arista’s 7130LB-Series and 7132LB-Series platforms. It performs ultra low latency Ethernet packet switching. Its packet switching feature set, port count, and port to port latency are a function of the selected SwitchApp profile. Detailed latency measurements are available in the userguide on the Arista Support site.

Arista’s DCS-7130LBR series of switches are capable of supporting SwitchApp, which is an FPGA-based L2/L3 switch. However, as the switch would then contain two switch ASICs (one traditional switch ASIC, and one FPGA-based switch) physically upon loading the SwitchApp application, there are certain limitations and nuances along with its usage. This document intends to explain some of the details.