- Written by Gaofeng Yue
- Posted on 6月 15, 2022
- Updated on 6月 16, 2022
- 9521 Views
This feature adds support for redistributing EOS SDK routes into IS-IS in the multi-agent routing protocol model. This feature existed in the single agent model by the configuration of redistribute static since EosSdk routes are treated as static routes in the single agent model.
- Written by Gaofeng Yue
- Posted on 12月 20, 2021
- Updated on 7月 21, 2026
- 12645 Views
Currently EOS supports redistribution into BGP at the global ( instance ) level. Also EOS supports redistribution in BGP at Address Family Identifier/Subsequent Address Family Identifier(AFI/SAFI) level to some extent. But the current redistribution mechanism is not flexible and does not provide full control at AFI/SAFI level ( some redistribution protocols are only supported at global level, or at some AFI/SAFI level ). This feature will support redistribution at AFI/SAFI level as well as at the global level. This will simplify the configuration requirements and supportability for complex and granular configurations when subsequent address family configurations co-exist. This will also give more control at AFI/SAFI level ( for example, route-map/rcf can be configured at AFI/SAFI level while they are not configured at global level ). This feature only works in multi-agent routing model.
- Written by Gaofeng Yue
- Posted on 4月 15, 2021
- Updated on 1月 6, 2026
- 13551 Views
This feature detects duplicate IP addresses configured on the switch already owned by hosts the switch has already learned. When the duplicate IP address is detected, a syslog message will be generated. It can help the network operator to identify IP address misconfiguration.
- Written by Gaofeng Yue
- Posted on 6月 3, 2020
- Updated on 12月 9, 2021
- 12006 Views
This feature introduces a metric for static routes so that the user can configure both administrative distance and
- Written by Gaofeng Yue
- Posted on 1月 23, 2019
- Updated on 3月 26, 2025
- 15014 Views
FIB compression allows us to program routes into the hardware more efficiently. Routes are programmed in the route
