Tag :: DCS-7050CX4

Static NAT allows a switch to modify the source or destination IP address, and optionally the Layer 4 port, of packets traversing it. Each static NAT rule is explicitly defined by the user and specifies a one-to-one mapping between an original IP address and a translated IP address.

Dynamic NAT is a feature which dynamically allocates an IP address to an incoming or outgoing flow. This address will replace source or destination IP for all packets of the flow. The new IP address given to the flow is from a pool of addresses called NAT pool. L4 port can also be replaced by a new one in case of NAPT (Network Address Port Translation). In address only NAT only the IP address is translated. NAPT is not supported in masquerade or overload mode.

Dynamic Twice NAT is a variant of the dynamic NAT feature where both the source and destination IP can be modified while forwarding a packet. One of the IP addresses will be dynamically assigned, while the other will be statically assigned.