- Written by Hyun Chul Chung
- Posted on June 10, 2020
- Updated on October 14, 2021
- 10449 Views
As of EOS 4.22.0F, EVPN all active multihoming is supported as a standardized redundancy solution. Redundancy
- Written by John Foley
- Posted on June 3, 2020
- Updated on June 3, 2020
- 8019 Views
The “set as path prepend” and “set as path match all replacement” route map configuration
- Written by Sandeep Betha
- Posted on January 22, 2021
- Updated on March 7, 2025
- 13347 Views
This feature adds support for user-configured BGP Nexthop Resolution RIB profiles for various BGP-based services e.g. IP unicast, L3 VPN, EVPN, etc. The feature allows an administrator to customize the next hop resolution semantics of BGP routes with an ordered list, or profile, of resolution RIB domains (i.e., either tunnel or IP domain). This allows EOS to direct specific services over the specified RIB domains, overriding the default behavior.
- Written by Keon Vafai
- Posted on June 22, 2020
- Updated on July 19, 2024
- 16718 Views
This feature adds support for BGP UCMP in the multi agent routing protocol model. The TOI for BGP UCMP in the ribd
- Written by Vamsi Anne
- Posted on December 16, 2020
- Updated on December 16, 2020
- 10465 Views
Egress Sflow sampling feature allows to sample unicast packets based on the egress interface. The
- Written by Vamsi Anne
- Posted on July 17, 2020
- Updated on July 17, 2020
- 9239 Views
Egress Sflow sampling feature allows to sample unicast packets based on the egress interface. The
- Written by Rick Porter
- Posted on June 29, 2020
- Updated on June 29, 2020
- 9248 Views
Fast poll counters allow for rapid collection of a basic set of MAC counters on supported platforms at a very high
- Written by Pedro Coutinho
- Posted on June 4, 2020
- Updated on June 4, 2020
- 8557 Views
EOS version 4.24.1F introduces support for specifying multiple vias to form ECMP in MPLS static tunnels. A new
- Written by Sandeep Betha
- Posted on June 4, 2020
- Updated on June 4, 2020
- 8352 Views
Current EOS PIM sparse mode implementation installs an (S, G) route in the hardware whenever it receives an (S, G) join
- Written by Hind Kishore Geel
- Posted on December 22, 2020
- Updated on February 5, 2022
- 9845 Views
This feature introduces the support for OSPF routes over GRE tunnels under default as well as non default VRFs. The
- Written by Shyam Kota
- Posted on April 15, 2020
- Updated on June 1, 2023
- 8416 Views
This priority drop feature provides a way to drop packets according to QOS priority when the device ingress maximum packet rate is oversubscribed.
- Written by Gaofeng Yue
- Posted on June 3, 2020
- Updated on December 9, 2021
- 8651 Views
This feature introduces a metric for static routes so that the user can configure both administrative distance and
- Written by Adrian Fettes
- Posted on June 5, 2020
- Updated on May 20, 2024
- 8916 Views
GRE ( Generic Routing Encapsulation ) packet header has a Key extension which is used by Arista to carry packet metadata. Currently packets mirrored at egress to a GRE tunnel destination do not have this information. This feature could be used to enable metadata in egress mirrored packets to GRE destinations.
- Written by Vishrant Vasavada
- Posted on June 10, 2020
- Updated on June 11, 2020
- 8180 Views
The CLI command “show rib route ip[ipv6]” and its sub commands (e.g. “show rib route ip