As per the mechanism suggested for MKA protocol, a new SAK generation, distribution and installation in all members of a connectivity association ( CA ) can be thought of happening in a number of steps

Support for Media Access Control Security (MACsec) with static keys was added in EOS 4.15.4. This feature brings

TOI 4.17.0F MacSec

A MACsec port with this feature enabled transmits LLDP frames without MACSec encryption and receives LLDP frames

MacSec 4.21.0F

If MACsec is enabled on an interface, it tries to establish MACsec Key Agreement (MKA) session(s) with its peer.

MacSec 4.21.1F

Media Access Control Security (MACSec) is an industry standard encryption mechanism that protects all traffic flowing on the Ethernet links. MACSec is based on IEEE 802.1X and IEEE 802.1AE standards.

Media Access Control Security (MACSec) is an industry standard encryption mechanism to protect all traffic flowing on Ethernet links. Mac Security is described in IEEE 802.1X and IEEE 802.1AE standards.

This feature enables MacSec service over VxLAN . Macsec over Vxlan is provided by mapping a VNI, Remote VTEP Ip to a

MacSec 4.21.1F

The macsec scheduler compensation feature is used to automatically make adjustments to the packet size seen by the scheduler for macsec encrypted traffic, based on mac security configuration. This feature is useful when macsec is configured on an interface. When a packet egresses out of the macsec enabled interface, the packet gets encrypted by adding additional macsec headers.

MacSec EOS 4.31.2F

MACsec Stateful Switchover (SSO) allows for a switchover from an active supervisor to a standby supervisor where MACsec traffic remains undisrupted during switchover. This TOI describes details and limitations of MACsec Stateful Switchover.

Currently, in EOS Macsec, padding of partial keys internally prepends both the CAK and CKN hex strings with 0s to satisfy the requirement of Key Derivation Function.This feature allows users to configure the zero padding to either prepend or append the pre-shared CAK/CKN configured in mac security profile. In general, full length CAK/CKN are recommended to be configured. However, this CLI knob can be used in case of configuration of partial CAK/CKN results into issues with derived keys between the peers. Note that the CKN advertised in MACsec control frames will still be without any padding, even when partial CKN is configured.

Media Access Control Security (MACsec) is an industry-standard encryption mechanism that protects all traffic flowing on the Ethernet links. MACsec is based on IEEE 802.1X and IEEE 802.1AE standards.

Support for Media Access Control Security ( MACsec ) was added in EOS-4.15.4. MACsec defines a secure channel ( SC ) from one peer to another peer as a security relationship which provides security guarantees for the frames transmitted from the first peer to the second peer.

MacSec EOS 4.28.2F

Support for Media Access Control Security (MACsec) was added in EOS 4.15.4. It introduced the concept of configuring

MacSec 4.21.1F

Support for Media Access Control Security ( MACsec ) was added in EOS-4.15.4. It introduced the concept of configuring pre-shared keys ( PSKs ) for the purpose of MKA negotiation.

MacSec EOS 4.28.0F

Media Access Control Security (MACsec) is an industry standard encryption mechanism that protects all traffic

MacSec 4.24.2 Cipher

Media Access Control Security (MACsec) is an industry standard security technology that provides secure

VLAN tagged MACsec refers to frames that have a VLAN tag between the MAC source address and the MACsec ethertype.  This VLAN tag is unencrypted (in the clear) so that intermediate devices between the MACsec endpoints can forward the MACsec frames based on this unencrypted VLAN tag.