- Written by Alton Lo
- Posted on 3月 18, 2020
- Updated on 1月 22, 2026
- 26896 Views
In the Centralized Anycast Gateway configuration, the Spines are configured with EVPN-IRB and are used as the IP Default Gateway(DWG), whereas the Top of rack switches perform L2 EVPN Routing.
- Written by Aaron Bamberger
- Posted on 10月 28, 2020
- Updated on 10月 28, 2020
- 14402 Views
In a traditional EVPN VXLAN centralized anycast gateway deployment, multiple L3 VTEPs serve the role of the
- Written by Kallol Mandal
- Posted on 4月 25, 2022
- Updated on 7月 25, 2025
- 13341 Views
Overlay IPv6 routing over VXLAN tunnel using an anycast gateway (direct routing) has been previously supported using the “ipv6 virtual-router” configuration for both the data-plane and EVPN (or CVX) control-plane learning environments.
- Written by Jialong Chen
- Posted on 12月 17, 2021
- Updated on 4月 7, 2026
- 13655 Views
This feature expands Multi Domain EVPN VXLAN to support an Anycast Gateway model as the mechanism for gateway
- Written by Chirag Dasannacharya
- Posted on 12月 24, 2024
- Updated on 12月 24, 2024
- 4255 Views
This feature allows an operator to configure a centralized routing topology with an IPv6 VXLAN underlay. This is useful for customers who want to use an anycast (VARP) gateway for routing over an IPv6 control plane. VARP allows multiple switches to simultaneously route packets from a common IP address in an active-active router configuration. Each switch is configured with the virtual IP address and a common virtual MAC address.