- Written by Ryan Lui
- Posted on 8月 21, 2023
- Updated on 8月 23, 2023
- 4988 Views
Storm control is a feature that allows the data plane to drop excess broadcast, unknown unicast, and/or multicast packets if the ingress packet rate exceeds a user-configurable threshold.
- Written by Ryan Lui
- Posted on 12月 14, 2020
- Updated on 12月 14, 2020
- 6849 Views
The existing storm control interface configuration mode CLI commands have been extended to support a new
- Written by Yongxiang Chen
- Posted on 2月 19, 2021
- Updated on 2月 19, 2021
- 7563 Views
4.25.2F introduces storm control with packet per second support in the platforms listed below. TOI describing the
- Written by Praveen Kumar Yadav
- Posted on 11月 16, 2023
- Updated on 11月 16, 2023
- 3656 Views
Storm control enables traffic policing on floods of packets on L2 switching networks. Support was enabled for Front panel ports and Lag in eos-4-25-2f with storm-control-speed-rate-support. Now, storm control will be supported per subinterfaces( both ethernet and port-channel). Scale of subinterfaces is 4095.
- Written by Yongxiang Chen
- Posted on 2月 19, 2021
- Updated on 6月 26, 2023
- 8684 Views
Storm control enables traffic policing on floods of packets on L2 switching networks. The documentation describes
- Written by Vincent (Chia Hsuan)
- Posted on 9月 24, 2024
- Updated on 9月 24, 2024
- 169 Views
A traffic storm is a flood of packets entering a network, resulting in excessive traffic and degraded performance. Storm control prevents network disruptions by limiting traffic beyond specified thresholds on individual physical LAN interfaces. Storm control monitors inbound traffic levels over one-second intervals and compares the traffic level with a specified benchmark. The storm-control command configures and enables storm control on the configuration mode physical interface.