- Written by Augusto Wong
- Posted on September 1, 2021
- Updated on September 1, 2021
- 6553 Views
This feature adds a SNMP CLI knob to allow an interface’s speed, as shown in IF MIB, to reflect its shaped bandwidth.
- Written by Augusto Wong
- Posted on February 17, 2021
- Updated on October 21, 2022
- 10150 Views
DHCP Relay feature forwards DHCP packets between client and server when the DHCP Server is not in the same broadcast domain as the client. DHCP Relay should be configured on the gateway interface (SVI/ L3 interface ) for the clients. DHCP Relay agent creates a new unicast DHCP packet and sets the giaddr field to the ‘primary’ IP address of the interface on which DHCP request packet is received. The modified request packet is then relayed to one or more configured DHCP servers. DHCP server assigns ip address to client from the pool corresponding to giaddr field.