Total 7 results found for the keyword of "eos section 20 2 tap aggregation description"
... timestamp
Drop count
Device ID
Egress
interface
FCS type
Reserved
tap aggregation Extra MPLS Pop (4 to 6 Labels)
Available starting with eos Release 4.23.1F extra MPLS pop for tap
aggregation ...
...
sFlow exports packet samples and topology meta data to a centralized collector
application.
sFlow scales and operates on all switch ports simultaneously.
eos implements sFlow on all switches, without ...
...
VXLAN Decapsulation for interface with multiple VRFs
Please refer to the following security advisory after the eos software upgrade for a
network that leverages VXLAN decapsulation on an interface ...
... detection
disabled command detects any
duplicate IP address on the interface. When the switch
detects the duplicate IP address, eos generates a syslog
message. It helps the network operator to identify ...
... its performance or feature set. Filtering syntax is the industry standard.
Note: eos supports egress IPv4 and IPv6 Port Access Control Lists (PACLs) by default. To enable egress MAC PACLs, add the ...
... command for shutting down the Tx output path for unidirectional
mode.
1-second update of pre-FEC BER, OSNR, ESNR.
400GBASE-ZR transceiver with Open Forward Error Correction (O-FEC) (eos
release 4.25.2F.) ...
... Type Ports
---- ----------- ---- -----
Total Mac Addresses for this criterion: 0
Beginning with eos Release 4.26.0F,
PortSec-Protect enforces a limit on the number of ...