Total 7 results found for the keyword of "eos section 22 4 vxlan command descriptions"
... a single agent, but supports additional agents to allow multiple CPUs and increase the total number of packets processed. eos
supports up to 8 SFTAgents.
Use the following command to add 3 instances ...
...
sFlow exports packet samples and topology meta data to a centralized collector
application.
sFlow scales and operates on all switch ports simultaneously.
eos implements sFlow on all switches, without ...
... The agent gathers data from the MIB and responds to requests for information. For a list of supported MIBs, refer to the release notes for the specific eos version.
This section discusses enabling the ...
... Note: All
connected interfaces are advertised as bound. However, eos currently advertised
labels for /32 addresses, and FEC filter is configured to install only
x.x.x.200/32
prefixes. North Edge.17:51:17# ...
... also
advertises this Locator along with the SIDs. SRv6 computes the reachability to SIDs
using the Locator advertisement. eos supports default-algorithms and FlexAlgo
SIDs.
Multiple node SIDs can be ...
VRRP and VARP
A virtual IP (VIP) address
is an IP address that does not directly connect to a specific interface.
Inbound packets sent to a Virtual IP address are redirected to a physical
network ...
... path for unidirectional
mode.
1-second update of pre-FEC BER, OSNR, ESNR.
400GBASE-ZR transceiver with Open Forward Error Correction (O-FEC) (eos
release 4.25.2F.)
4x100 Gb/s mode for the 400GBASE-ZR ...