- Written by VIKAS NARAYANAPPA
- Posted on March 12, 2026
- Updated on March 12, 2026
- 468 Views
Adjacency sharing is a feature which deduplicates FEC to avoid installing identical FECs in hardware. Often this applies to Equal Cost Multi Path (ECMP) FECs, which are generally a much more scarce resource. Hierarchical FECs are not supported with adjacency sharing.
- Written by VIKAS NARAYANAPPA
- Posted on June 15, 2021
- Updated on July 14, 2021
- 11062 Views
A pseudowire is usually transported over a single network path in order to preserve the packet ordering of each
- Written by VIKAS NARAYANAPPA
- Posted on May 5, 2021
- Updated on April 25, 2023
- 10987 Views
If a network device uses deep packet inspection for load balancing, RFC6790 recommends deployments to use entropy label in LDP to improve load balancing in MPLS networks by providing sufficient entropy in the label stack itself.
- Written by VIKAS NARAYANAPPA
- Posted on March 17, 2021
- Updated on May 11, 2022
- 11399 Views
If a network device uses deep packet inspection for load balancing, RFC6790 recommends deployments to use entropy label in LDP to improve load balancing in MPLS networks by providing sufficient entropy in the label stack itself.
- Written by VIKAS NARAYANAPPA
- Posted on April 15, 2020
- Updated on April 15, 2020
- 11015 Views
A pseudowire is usually transported over a single network path in order to preserve the packet ordering of each
- Written by VIKAS NARAYANAPPA
- Posted on August 23, 2019
- Updated on September 5, 2019
- 11233 Views
Network operators usually configure load balancing in their networks in order to distribute load across the links to
