- Written by Kallol Mandal
- Posted on March 3, 2023
- Updated on March 7, 2023
- 7602 Views
In a VXLAN routing setup using VXLAN Controller Service (VCS), this feature will enable the following on a switch that is running as a VCS client.
- Written by Jeff Wen
- Posted on January 21, 2019
- Updated on November 30, 2023
- 11987 Views
In the traditional data center design, inter-subnet forwarding is provided by a centralized router, where traffic traverses across the network to a centralized routing node and back again to its final destination. In a large multi-tenant data center environment this operational model can lead to inefficient use of bandwidth and sub-optimal forwarding.
- Written by Gokhan Tanisik
- Posted on April 25, 2025
- Updated on April 25, 2025
- 123 Views
This feature adds the ability for an L3 default gateway TEP in a Centralized Gateway topology to advertise its SVI virtual IP addresses to VARP MAC bindings and primary addresses to System MAC bindings using EVPN type-2 routes for EVPN VXLAN overlays. Two new commands, redistribute router-mac virtual-ip[next-hop vtep primary] and redistribute router-mac system ip are introduced to enable the redistributions. This would help the L2 TEP on the network to learn the default gateway IP without flooding an ARP request for the gateway IP. This feature is only intended for Centralized Gateway Topologies.