- Written by Srinivasan Koona Lokabiraman
- Posted on 6月 3, 2020
- Updated on 6月 3, 2020
- 8284 Views
It is often useful to know on a per AFI/SAFI basis, the number of paths that have been selected from a peer as best paths.
- Written by Mason Alexander Flowers
- Posted on 1月 3, 2023
- Updated on 1月 17, 2023
- 5953 Views
This feature introduces the show bgp evpn sanity ( brief | detail )command. This command displays which EVPN configuration attributes are inconsistent as well as potential errors in the EVPN operational state.
- Written by Scott Smith
- Posted on 10月 18, 2024
- Updated on 10月 18, 2024
- 455 Views
This feature allows capturing packets and byte counts at high resolution on physical interfaces, down to 1 ms granularity. Allows for detecting anomalous packet flows, or confirming the expected bandwidth usage. Requires selecting a set of interfaces to sample, a time resolution, and sampling duration.
- Written by Jacob Sword
- Posted on 3月 6, 2020
- Updated on 3月 6, 2020
- 7909 Views
On DCS 7280E, DCS 7500E, DCS 7280R, DCS 7500R, DCS 7020R, DCS 7280R2, DCS 7500R2 systems, it is possible to select
- Written by Shyam Kota
- Posted on 11月 23, 2020
- Updated on 11月 24, 2020
- 10328 Views
This feature is an extension of Qos Policy. It allows the user to configure Qos Policy Map counters. If a class map is
- Written by Navlok Mishra
- Posted on 8月 16, 2018
- Updated on 6月 19, 2019
- 9716 Views
This feature is an extension of Qos Policy. It allows the user to configure Qos Policy Map counters. If a class map is
- Written by Adrian Fettes
- Posted on 4月 10, 2024
- Updated on 4月 10, 2024
- 2698 Views
sFlow is a technology for monitoring traffic in data networks containing switches and routers. This document details supported platforms for the sFlow Version 5 specification, as well as which platforms are supported for various flow_data and sample_data types.
- Written by Dongping Zhu
- Posted on 11月 23, 2023
- Updated on 11月 23, 2023
- 3639 Views
By default, every Arista switch applies the read-only ACL (Access Control List) named "default-control-plane-acl" to control plane traffic in every VRF. This feature allows the user to configure a different ACL to override the system default applied to every VRF. VRF-specific control plane ACL configuration, if present, still takes precedence over the default ACL configured.
- Written by Leighton Carmichael-Powell
- Posted on 1月 3, 2023
- Updated on 7月 14, 2023
- 5897 Views
This document describes the prefix counter feature and is intended for customers who are familiar with and are using VRF selection policies (see linked TOI for details). In short, the prefix counter feature enables traffic matching a VRF selection policy to be counted on a per-prefix/per-route basis. This is limited to IPv4 traffic and prefixes of length 32.