- Written by Travis Hammond
- Posted on 12月 29, 2021
- Updated on 12月 29, 2021
- 12918 Views
TCAM features matching on the same packet type and executing the same action are implicitly prioritized if both are
- Written by Tanuj Kumar Jhamb
- Posted on 2月 22, 2022
- Updated on 3月 3, 2022
- 11771 Views
This feature allows the user to match the 20 bit IPV6 flow label using the Qos Policy Map and allows to classify the flow-label controlled traffic.
- Written by Tanuj Kumar Jhamb
- Posted on 6月 20, 2022
- Updated on 6月 29, 2022
- 10911 Views
With the use of MAC ACL configuration, match on ethertype can be programmed under QoS class-map configuration which will help customers to classify the control traffic based on ethertype (e.g. PPPoE discovery (0x8863) / session (0x8864) stage ) along with match on sub protocol (LCP/IPCP/PAP/CHAP) which is present in the payload.
- Written by Vallela Kaushik Shashank Reddy
- Posted on 3月 12, 2026
- Updated on 3月 12, 2026
- 308 Views
Support for matching of DSCP,ECN,VLAN is available under the QOS class-map configuration on Arista switches.
- Written by Tanuj Kumar Jhamb
- Posted on 12月 16, 2021
- Updated on 9月 2, 2022
- 12801 Views
This feature allows the user to configure upto 1023 unique QoS Policy-maps per chip.
- Written by Tanuj Kumar Jhamb
- Posted on 10月 21, 2021
- Updated on 10月 26, 2021
- 12127 Views
Support for matching of DSCP / ECN is available under the QOS class map configuration on Arista switches.
- Written by Will Li
- Posted on 4月 18, 2022
- Updated on 6月 2, 2022
- 11162 Views
The ‘redirect’ action used in TCAM profile has lower priority than system rules, if packets match both TCAM rule using ‘redirect’ action and system rules. Hence ‘redirect’ action does not take effect on these packets.