Overview

This section discusses the following topics:

Scope

This guide is for properly trained service personnel and technicians who need to install the following Arista Networks Cognitive Campus Switches:

CCS-720XP-96ZC2 CCS-720XP-96ZC2-M-S
Important:

Only qualified personnel should install, service, or replace this equipment.

 

Seul le personnel qualifié doit installer, service, ou remplacer cet équipement.

 

Receiving and Inspecting the Equipment

Upon receiving the switch, inspect the shipping boxes and record any external damage. If you suspect that part of the shipment is damaged, retain packing materials; the carrier may need to inspect them.

If the boxes were not damaged in transit, unpack them carefully.Do not discard any accessories packaged in the same box as the main unit.

Inspect the packing list and confirm that you received all listed items. Compare the packing list with your purchase order. The Parts List provides a list of components included with the switch.

Installation Process

The following tasks are required to install and use the switch:

  1. Select and prepare the installation site (Site Selection).
  2. Assemble the installation tools (Tools and Parts Required for Installation).
  3. Attach the mounting brackets (Attaching Mounting Brackets to the Chassis).
  4. Install the switch in an equipment rack (Inserting the Switch into the Rack)
  5. Connect the switch to the power source and network devices (Connecting Power Cables).
  6. Configure the switch (Configuring the Switch).
    Important:

    Class 1 Laser Product: This product has provisions for installing Class 1 laser transceivers, which provide optical coupling to the communication network. After a Class 1 laser product is installed, the equipment is a Class 1 Laser Product. The customer is responsible for selecting and installing the Class 1 laser transceiver and for ensuring that the Class 1 AEL (Allowable Emission Limit) per EN/IEC 60825, CSA E60825-1, and Code of Federal Regulations 21 CFR 1040 is not exceeded after the laser transceiver have been installed. Do not install laser products whose class rating is greater than 1. Refer to all safety instructions that accompany the transceiver before installation. Only Class 1 laser devices, certified for use in the country of installation by the cognizant agency, are to be utilized in this product.

     

    Appareil à laser de classe 1: Cet appareil comporte des dispositions permettant d'installer des émetteurs-récepteurs fournissant un couplage optique au réseau de communication. Une fois l'appareil à laser de classe 1 installé, l'équipement devient un appareil à laser de classe 1. Le client est responsable du choix et de l'installation de l'émetteur-récepteur à laser de classe 1 et il doit s'assurer que les limites d'émission admissibles pour la classe 1 régulées par les normes EN/IEC 60825 et CAN/CSA E60825-1 et par le Code of Federal Regulations 21 CFR 1040 ne soient pas dépassées après l'installation de l'émetteur-récepteur à laser. N'installez pas d'appareils à laser dont la classification est supérieure à 1. Avant l'installation, lisez attentivement les instructions de sécurité fournies avec l'émetteur-récepteur. Seuls les appareils à laser de classe 1 qui ont été certifiés par l'autorité agréée pour une utilisation dans le pays d'installation peuvent être utilisés dans ce produit.

    Important:

    The ultimate disposal of this product should be by all applicable laws and regulations.

     

    Élimination définitive de ce produit devrait être en conformité avec toutes les lois et règlements applicables.

     

Obtaining Technical Assistance

Any customer, partner, reseller, or distributor holding a valid Arista Service Contract can obtain technical support in any of the following ways:

  • Email: This email address is being protected from spambots. You need JavaScript enabled to view it.. This is the easiest way to create a new service request.

    Include a detailed description of the problem and the “show tech-support” output.

     

  • Web: https://www.arista.com/en/support.

    You can create a support case through the support portal on our website. You may also download the most current software and documentation and view FAQs, Knowledge Base articles, Security Advisories, and Field Notices.

     

  • Phone: +1 866-476-0000 or +1 408-547-5502.
Important:

There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.

 

Aucune pièce réparable par l'utilisateur à l'intérieur. Confiez toute réparation à un technicien qualifié.

 

Specifications

The following tables list the specifications of switches covered by this guide

Table 1. Switch Specifications (Dimensions and Weights)
Switch Size (W x H x D) Weight
CCS-720XP-96ZC2 48.3 x 8.8 x 40.4 cm

(19 x 3.5 x 15.9 inches)

 14.1 kg

(31 lbs.)
CCS-720XP-96ZC2-M-S 48.3 x 8.8 x 40.4 cm

(19 x 3.5 x 15.9 inches)

 14.1 kg

(31 lbs.)

 

 

Table 2. Switch Specifications (Operational and Storage)
Switch Operating Temperature Storage Temperature Operating Altitude Relative Humidity
All 0° to 40°C

(32° to 104°F)

 -25° to 70°C

(-13° to 158°F)

 0 to 3,000 meters

(0 to 10,000 feet)

 5 to 90%

(non-condensing)

 

 

Table 3. Switch Specifications (Power Input)
Power Source PSU Models Ratings Over-current Protection (Branch Circuit)
Power Input (AC Power) PWR-1021-AC-RED 100 - 240 VAC, 12.0 to 5.0 A, 50/60 Hz 20 A
Power Input (DC Power) PWR-521-DC-RED -48V to -60VDC, 13A 20 A

 

 

Table 4. Switch Specifications (Power Draw)
Switch Supported Power Supply Power Draw (Typical / Maximum) PoE Power Budget Three / Four PSUs
CCS-720XP-96ZC2 PWR-1021-AC-RED 245 W / 278 W 2255 W / 3077 W
CCS-720XP-96ZC2-M-S PWR-1021-AC-RED 216 W / 236 W 3512 W / 3492 W

 

 

Note: Configurations with less than three PSUs are currently not supported.