recovery wait-time (CloudEOS and vEOS)

The recovery wait-time command in the cloud-ha configuration sub-mode allows takes back control of local route tables after failure recovery. The no recovery wait-time command removes the configuration from the CloudEOS and vEOS running-config. Default is set at 30 seconds.

Command Mode

Cloud High Availability peer configuration

Command Syntax

recovery wait-time<period>

no recovery wait-time<period>

default recovery wait-time<period>

Parameters

  • period The defined amount of time to take back control of local route tables after failure recovery. Default is 30 seconds.

Example:

The following example shows the wait time is configured to 90 seconds.

switch(config-cloud-ha-peer1)#recovery wait-time 90

Example:

The following example removes the configured the wait time.

switch(config-cloud-ha-peer1)#no recovery wait-time 

Example:

The following example configures the wait time to the default of 30 seconds.

switch(config-cloud-ha-peer1)#default recovery wait-time