Total 16 results found for the keyword of "eos section 24 3 configuring a spanning tree"
spanning tree Protocol
spanning tree Protocols prevent
bridging loops in Layer 2 Ethernet networks. Arista switches support
Rapid spanning tree, Multiple spanning tree, and Rapid-Per VLAN spanning
tree ...
VCS to EVPN Hitless Migration
VCS to EVPN Hitless Migration enables support for migrating from only using VCS as
the control plane to only using EVPN as a control plane in a hitless manner concerning ...
Sample Configurations
EVPN VXLAN IRB Sample Configuration
In the following topology, we are connecting a Layer 2 site with a Layer 3 site using Layer
3 EVPN (type-5 route). The right side leaves ...
IGMP and IGMP Snooping
IGMP Snooping
IGMP Host Proxy
Description
Supported Features
IGMP Protocols
configuring IGMP
configuring IGMP Snooping
IGMP Host Proxy
IGMP and IGMP Snooping
Commands ...
... that are configured by a custom agent using the eos SDK or eAPI
and age out (expire) after a specified time period.
For example, if you are using a custom agent that reacts to traffic sent to the CPU ...
... Mac Address Type Ports
---- ----------- ---- -----
Total Mac Addresses for this criterion: 0
Beginning with eos Release 4.26.0F,
PortSec-Protect enforces a limit on ...
... management 1
Local System:
- Chassis ID type: MAC address (4)
Chassis ID : 001c.730f.11a8
- System Name: "switch.aristanetworks.com"
- System Description: "Arista Networks eos version 4.13.2F ...
... Configuration
Procedures
VLAN Configuration
Commands
VLAN Introduction
Arista switches support industry standard 802.1q VLANs. Arista eos provides tools to manage and extend VLANs throughout the ...
Layer 2 Protocol Forwarding
eos supports Layer2 (L2) Protocol Forwarding on Ethernet interfaces in addition to
Type-5 PW. Also, eos allows selective forwarding of certain L2 Protocol packets, such ...
... in the default state which is the discarding state. This is an expected behavior.
Note: It is highly recommended that both MLAG peer switches are identical platforms and run identical eos images. ...
... upgrade method if you have VRRP
configured on the switch.
Upgrading the eos image with Smart System
Upgrade
Using SSU to upgrade the active eos image requires a five-step process:
Preparing the ...
Standard Upgrades and Downgrades
Standard software upgrades and downgrades on Arista switches are accomplished by installing a
different eos image and reloading the switch. On switches with redundant ...
... control access to eos commands. Three data services conduct authentication, authorization, and accounting (AAA) activities: a local security database, TACACS+ servers, and RADIUS servers.
The configuring ...
... eXtended Packet Numbering (XPN) cipher suites.
MACsec Limitations
The following are the limitations of MACsec:
eos supports MACsec only on point-to-point links unless static SAK is ...
... CLI.
This chapter includes these sections:
Accessing the eos CLI
Processing Commands
Kernel-based Virtual Machine Commands and Configuration
Switch Platforms
Command Modes
Managing Switch
Configuration ...
... is
limited. Any configuration changes made on the standby supervisor will be lost when
the supervisor reboots.
Note: When upgrading the eos on a dual-supervisor switch to an SSO-capable version
(4.11.0 ...