Total 30 results found for the keyword of "eos 24 5 ipv4 route scale"
... Type Ports
---- ----------- ---- -----
Total Mac Addresses for this criterion: 0
Beginning with eos Release 4.26.0F,
PortSec-Protect enforces a limit on the number of ...
... in the default state which is the discarding state. This is an expected behavior.
Note: It is highly recommended that both MLAG peer switches are identical platforms and run identical eos images. ...
... The maximum number of ports per LAG varies by platform; numbers for each
platform in the latest eos release are available here: https://www.arista.com/en/support/product-documentation/supported-features. ...
... command for shutting down the Tx output path for unidirectional
mode.
1-second update of pre-FEC BER, OSNR, ESNR.
400GBASE-ZR transceiver with Open Forward Error Correction (O-FEC) (eos
release 4.25.2F.) ...
... SR
Policy IdentificationThe following identifies an SR
policy.
Endpoint - An ipv4 or IPv6 address which
refers to the destination of the policy. eos
allows 0/0 and 0:: and calls these IP addresses
null ...
Quality of Service
This chapter describes the eos Quality of Service (QoS) implementation, including configuration instructions and command descriptions. Topics covered by this chapter include ...
... eXtended Packet Numbering (XPN) cipher suites.
MACsec Limitations
The following are the limitations of MACsec:
eos supports MACsec only on point-to-point links unless static SAK is ...
... control access to eos commands. Three data services conduct authentication, authorization, and accounting (AAA) activities: a local security database, TACACS+ servers, and RADIUS servers.
The Configuring ...
... Nexthop groups supports configuring the backup paths through eos RPC APIs and CLI. Whenever the route or prefix begins pointing to configured backup paths, the event monitor database logs a backup activation ...
... CLI.
This chapter includes these sections:
Accessing the eos CLI
Processing Commands
Kernel-based Virtual Machine Commands and Configuration
Switch Platforms
Command Modes
Managing Switch
Configuration ...