Total 47 results found for the keyword of "eos 25 3 configuring ipv6"
... the eos image with Smart System
Upgrade
Using SSU to upgrade the active eos image is a five-step process:
Prepare switch for upgrade ( Prepare the Switch for SSU).
Transfer image file to the switch ...
Standard Upgrades and Downgrades
Standard software upgrades
and downgrades on Arista switches are accomplished by installing a different
eos image and reloading the switch. On switches with redundant ...
Setting the PTP Transport Type
To set the PTP transport type, use the ptp
transport command.
This command configures the PTP transport type for the interface to IPv4.
switch(config-if-Et5)# ptp transport ...
Session Management Commands
Global Configuration Commands
configure replace
configure session
management api eos-sdk-rpc
management api external-services
management api gnmi
management api gnsi ...
... of the time source or,
if that source has an ipv6 address, the first four octets of the MD5 hash of that ipv6 address.
In eos releases prior to 4.23.2, the show ntp status
command identified the system ...
Event Monitor
The event monitor writes system
event records to local files for access by SQLite database commands.
Note:
Beginning with release eos-4.20.5F, event-monitor is not enabled by default.
Use ...
... CLI.
This chapter includes these sections:
Accessing the eos CLI
Processing Commands
Kernel-based Virtual Machine Commands and Configuration
Switch Platforms
Command Modes
Managing Switch
Configuration ...