Total 50 results found for the keyword of "eos section 11 6 ethernet configuration commands"
Sample configurations
EVPN VXLAN IRB Sample configuration
In the topology below, we are connecting a Layer 2 site with a Layer 3 site using Layer 3
EVPN (type-5 route). Right side leaves are MLAG ...
EVPN and VCS commands
Router BGP configuration Mode
next-hop resolution
disabled
redistribute service vxlan
route-target
route-target export
route-target import
route-target route-map
...
Multiprotocol Label Switching (MPLS)
Tunneling protocols encapsulate packets of a different protocol as the payload of a larger frame for delivery within networks utilizing the encapsulating protocol. ...
... is used for broadcast, multicast, and unknown
unicast traffic.
For a list of VXLAN feature support in a specific eos release, consult the appropriate release
notes here:https://www.arista.com/en/support/software-download. ...
ethernet VPN (EVPN)
This chapter describes Arista’s
EVPN implementation. sections in this chapter include:
EVPN Overview
EVPN Layer 3 Core
Operations
Integrated Routing and
Bridging
VPN MPLS ...
... full10G Not Present
Et4/7 connected1 full10G Not Present
Et4/8 connected1 full10G Not Present
Et4/9 connected1 full10G Not Present
switch>
Referencing Multi-lane Ports
eos supports two types of ...
Timing Protocols
The Precision Time Protocol
(PTP) provides a greater degree of clock accuracy for networked devices,
allowing clocks to be synchronized locally in increments of less than
a microsecond. ...
...
This command replaces the EOS CLI prompt with an SQLite
prompt.switch#event-monitor interact
sqlite>
This command exits SQLite and returns to the EOS CLI
prompt.sqlite> .quit
switch#
event-monitor ...
... server. Command authorization can be provided by eos local configuration
or TACACS+. The XMPP server should use the same authentication source
as the switches. RADIUS is not supported as an XMPP authorization ...
... sent 0:12:27 ago
show flow tracking sampled
flow-table
The show flow tracking sampled flow-table command displays
information about the active flows maintained in the eos.
Command Mode
EXEC ...
sFlow
This chapter describes Arista's implementation of sFlow, including configuration instructions and command descriptions. Topics covered by this chapter include:
sFlow Conceptual Overview
sFlow ...
... eos version.
This chapter discusses enabling the SNMP
agent on an Arista switch and controlling notification transmissions
from the agent. Information on using SNMP management systems is available
in ...
VM Tracer
This chapter describes VM Tracer
configuration and usage and contains these sections:
VM Tracer Introduction
VM Tracer Description
VM Tracer configuration Procedures
VM Tracer ...
MapReduce Tracer
This section describes Arista’s implementation of MapReduce Tracer, including configuration instructions and command descriptions. Topics covered by this section include:
MapReduce ...
Multiprotocol Label Switching (MPLS)
Tunneling protocols encapsulate packets of a different protocol as the payload of a larger frame for delivery within networks utilizing the encapsulating protocol. ...
Multiprotocol Label Switching (MPLS)
Tunneling protocols encapsulate packets of a different protocol as the payload of a larger frame for delivery within networks utilizing the encapsulating protocol. ...
Multiprotocol Label Switching (MPLS)
Tunneling protocols encapsulate packets of a different protocol as the payload of a larger frame for delivery within networks utilizing the encapsulating protocol. ...
...
TAP Aggregation QoS Handling on TAP Ports
Before eos 4.20.5F, QoS behavior was not enforced for TAP aggregation ports, meaning that QoS
behavior for packets passing through the device was not ...
Latency Analyzer (LANZ)
Arista Networks’ Latency
Analyzer (LANZ) is a family of eos features that provide enhanced visibility
into network dynamics, particularly in areas related to the delay packets
experience ...
Multicast Source Discovery Protocol (MSDP)
Multicast Source Discovery
Protocol (MSDP) describes a topology that connects multiple IPv4 Protocol
Independent Multicast Sparse-Mode (PIM-SM) domains. ...