Total 16 results found for the keyword of "eos section 12 5 port channel and lacp configuration commands"
... (also configured as a dynamic LAG) on the partner switch. The maximum number of ports per LAG varies by platform; numbers for each platform in the latest eos release are available here: https://www.arista.com/en/support/product-documentation/supported-features. ...
...
VXLAN Decapsulation for interface with multiple VRFs
Please refer to the following security advisory after the eos software upgrade for a
network that leverages VXLAN decapsulation on an interface ...
... command for shutting down the Tx output path for unidirectional
mode.
1-second update of pre-FEC BER, OSNR, ESNR.
400GBASE-ZR transceiver with Open Forward Error Correction (O-FEC) (eos
release 4.25.2F.) ...
...
Note: In eos releases prior to 4.23.2, this command identified system peers
with IPv6 addresses by their reference IDs (the first four octets of the MD5 hash of
the IPv6 address). In later releases, ...
...
sFlow exports packet samples and topology meta data to a centralized collector
application.
sFlow scales and operates on all switch ports simultaneously.
eos implements sFlow on all switches, without ...
VCS to EVPN Hitless Migration
VCS to EVPN Hitless Migration enables support for migrating from only using VCS as
the control plane to only using EVPN as a control plane in a hitless manner concerning ...
LDP Pseudowire
LDP pseudowire provides support for emulating Ethernet connections over a
Multiprotocol Label Switching (MPLS) network, and controlled using the extension of the MPLS
Label Distribution ...
EVPN VXLAN Single-Gateway Centralized Routing
In a traditional EVPN VXLAN centralized anycast gateway deployment, multiple L3 VTEPs
serve the role of the centralized anycast gateway. For the hosts ...
... offers an echo function. eos supports
asynchronous mode and the echo function.
Asynchronous Mode
Demand Mode
Asynchronous Mode
In asynchronous mode, BFD control packets are exchanged by neighboring ...
... that are configured by a custom agent using the eos SDK or eAPI
and age out (expire) after a specified time period.
For example, if you are using a custom agent that reacts to traffic sent to the CPU ...
... configuration
Procedures
VLAN configuration
Commands
VLAN Introduction
Arista switches support industry standard 802.1q VLANs. Arista eos provides tools to manage and extend VLANs throughout the ...
... SR
Policy IdentificationThe following identifies an SR
policy.
Endpoint - An IPv4 or IPv6 address which
refers to the destination of the policy. eos
allows 0/0 and 0:: and calls these IP addresses
null ...
... in the default state which is the discarding state. This is an expected behavior.
Note: It is highly recommended that both MLAG peer switches are identical platforms and run identical eos images. ...
... Type ports
---- ----------- ---- -----
Total Mac Addresses for this criterion: 0
Beginning with eos Release 4.26.0F,
portSec-Protect enforces a limit on the number of ...
... upgrade method if you have VRRP
configured on the switch.
Upgrading the eos image with Smart System
Upgrade
Using SSU to upgrade the active eos image requires a five-step process:
Preparing the ...
... control access to eos commands. Three data services conduct authentication, authorization, and accounting (AAA) activities: a local security database, TACACS+ servers, and RADIUS servers.
The Configuring ...