Total 46 results found for the keyword of "eos section 21 3 vxlan configuration"
22.3 vxlan configuration These sections describe vxlan configuration tasks: • section 22.3.1: Configuring the VTI • section 22.3.2: Head End Replication configurationsection 22.3.3: vxlan Routing ...
45.3 VM Tracer configuration Procedures The following sections describe the session configuration process, configuring the NSX-V connection for vxlan based configurations, and the procedure for enabling ...
45.4 VM Tracer configuration Commands Global configuration Commands • vmtracer session Interface configuration (Ethernet and Port Channel) Commands • vmtracer VMTracer configuration Commands • allowed-vlan ...
25.4 VRRP and VARP configuration Commands This section contains descriptions of CLI commands that support VRRP and VARP. Global configuration Commands • ip fhrp accept-mode • ip virtual-router mac-address ...
23.8 Sample configurations 23.8.1 EVPN vxlan IRB Sample configuration In the topology below, we are connecting a Layer 2 site with a layer 3 site using layer 3 EVPN (type-5 route). Right side leaves are ...
22.2 vxlan Description These sections describe vxlan architecture, the data objects that comprise a vxlan network, and process of bridging packets through a vxlan network. • section 22.2.1: vxlan Architecture ...
22.4 vxlan Command Descriptions vxlan Global configuration Commands • interface vxlan • ip address virtual • vxlan vni notation dotted vxlan Interface configuration Commands • vxlan flood vtep ...
21.3 VLAN configuration Procedures These sections describe basic VLAN configuration tasks. • section 21.3.1: Creating and Configuring VLANs • section 21.3.2: Configuring VLAN Switching • section ...
21.4 VLAN configuration Commands Global VLAN configuration Commands • interface vlan • vlan • vlan internal order VLAN configuration Mode Commands • mac address forwarding • name (VLAN configuration ...
15.6 MACsec Proxy For vxlan The MACsec Proxy for vxlan feature enables the MACsec service over vxlan. MACsec over vxlan is provided by mapping a Visual Networking Index (VNI), Remote vxlan tunnel endpoint ...
... Ports eos supports two types of Ethernet ports: • single-lane (also called fixed-lane) • multi-lane (also called flexible-lane) Single-lane (or “fixed-lane”) ports are always modeled as a single interface ...
11.6 Ethernet configuration Commands Global configuration Commands • hardware port-group • hardware tcam • hardware counter feature in (DCS-7050x, 7350x, 7300x) • interface ethernet • interface ...
45.2 VM Tracer Description Cloud operating systems manage large virtualized computing infrastructures, including software and hardware. Cloud operating systems consist of virtual machines and hypervisors: ...
43.4 SNMP Commands Global configuration Commands • no snmp-server • snmp-server chassis-id • snmp-server community • snmp-server contact • snmp-server enable traps • snmp-server engineID local ...
41.4 MSDP Commands MSDP configuration Commands (Global) • connection retry interval • group-limit • ip msdp rejected-limit • originator-id local-interface • peer • router msdp MSDP Peer configuration ...
40.5 PIM Commands PIM configuration Commands (Global) • anycast-rp • candidate • fast-reroute • group-expiry-timer • holdtime • ip pim dr-notify-delay • log neighbors • register local-interface ...
39.6 IGMP and IGMP Snooping Commands IGMP configuration Commands (Interface configuration Mode) • igmp query-max-response-time • ip igmp last-member-query-count • ip igmp last-member-query-interval ...
36.2 BGP/MPLS L3 VPN Border Gateway Protocol/ Multiprotocol Label Switching (BGP/MPLS) L3 Virtual rivate Network (VPN) allows a Service Provider (SP) or an Enterprise to provide the service of interconnecting ...
36.5 MPLS Commands MPLS Commands • mpls ip • mpls static • show mpls route • show mpls route summary Decap Group Commands • ip decap-group • show ip decap-group • tunnel decap-interface (Decap ...
... val is two seconds. • initial-wait     Value ranges from 1 through 300000 ms. Default initial wait interval is 1000 ms. • hold-time     Value ranges from 1 through 300000 ms. Default hold interval is 100 ...