Total 8 results found for the keyword of "eos section 27 2 qos configuration platform independent features"
... timestamp Drop count Device ID Egress interface FCS type Reserved TAP Aggregation Extra MPLS Pop (4 to 6 Labels) Available starting with eos Release 4.23.1F extra MPLS pop for TAP Aggregation ...
... list, or profile, of resolution RIB domains (for example, either tunnel or IP domain). This allows eos to direct specific services over the specified RIB domains, overriding the default behavior. Further, ...
IGMP and IGMP Snooping IGMP Snooping IGMP Host Proxy Description Supported features IGMP Protocols Configuring IGMP Configuring IGMP Snooping IGMP Host Proxy IGMP and IGMP Snooping Commands ...
... arp 172.22.30.52 0025.900e.c63c arpa switch(config)# The arp proxy max-delay command enables delaying proxy ARP requests on the configuration mode interface. eos disables Proxy ARP by default. When ...
... to filter routes. The RACL divergence optimizes hardware resource usage on each forwarding ASIC. eos installs ACLs only on the hardware components corresponding to the member interfaces of the SVIs with ...
... command for shutting down the Tx output path for unidirectional mode. 1-second update of pre-FEC BER, OSNR, ESNR. 400GBASE-ZR transceiver with Open Forward Error Correction (O-FEC) (eos release 4.25.2F.) ...
... eXtended Packet Numbering (XPN) cipher suites.   MACsec Limitations The following are the limitations of MACsec: eos supports MACsec only on point-to-point links unless static SAK is ...
Quality of Service This chapter describes the eos Quality of Service (qos) implementation, including configuration instructions and command descriptions. Topics covered by this chapter include ...