Total 50 results found for the keyword of "eos section 28 2 ipv4 routing"
eos 4.31.2F User Manual - Traffic Management
... 32-bit integer used in the candidate path selection algorithm to select the “active” candidate path. The default value for preference is 100. Binding SID (BSID): an optional, SID.Note: In eos, a BSID ...
eos 4.31.2F User Manual - Ethernet Ports
... (eos release 4.25.2F) Support of 400GBASE-ZR with Open Forward Error Correction (O-FEC) (eos release 4.25.2F) Override a transceiver slot’s maximum power limit (eos release 4.25.2F) Platform Compatibility ...
eos 4.31.2F User Manual - Port Channels and LACP
... (also configured as a dynamic LAG) on the partner switch. The maximum number of ports per LAG varies by platform; numbers for each platform in the latest eos release are available here: https://www.arista.com/en/support/product-documentation/supported-features. ...
eos 4.31.2F User Manual - Multi-Chassis Link Aggregation
... MLAG peer switches are identical platforms and run identical eos images. Running different images/platform may result in a failure to form an association with the MLAG peer or see discrepancy in behavior. ...
eos 4.31.2F User Manual - Data Transfer
...  Type Ports ---- ----------- ---- ----- Total Mac Addresses for this criterion: 0 Beginning with eos Release 4.26.0F, PortSec-Protect enforces a limit on the number of MAC addresses, ...
eos 4.31.2F User Manual - User Security
...  The switch controls access to eos commands by authenticating user identity and verifying user authorization. Authentication, Authorization, and Accounting (AAA) activities are conducted through three ...
eos 4.31.2F User Manual - Data Plane Security
...  MACsec Licensing MACsec encryption is a eos licensed feature. A valid MACsec license must be configured on a switch. MACsec licenses are tied to a switch serial number and the licensee. ...
eos 4.31.2F User Manual - Event Monitor
Event Monitor The event monitor writes system event records to local files for access by SQLite database commands. Note: Beginning with release eos-4.20.5F, event-monitor is not enabled by default. Use ...
eos 4.31.2F User Manual - Switch Administration Commands
... command replaces the EOS CLI prompt with an SQLite prompt.switch# event-monitor interact sqlite> This command exits SQLite and returns to the EOS CLI prompt.sqlite> .quit switch# event-monitor ...
eos 4.31.2F User Manual - Command-Line Interface (CLI)
... CLI. This chapter includes these sections: Accessing the eos CLI Processing Commands Kernel-based Virtual Machine Commands and Configuration Switch Platforms Command Modes Managing Switch Configuration ...