Total 50 results found for the keyword of "eos section 35 2 is is"
Connectivity Monitor
Connectivity Monitor provides unidirectional monitoring of network resources from an
Arista switch. The monitored resources may or may not be Arista devices. In this
section, all ...
... can be enabled or disabled on the
fly without impacting regular packet forwarding functionality.
NDR Switch Sensor Extension
NDR switch sensor extends eos telemetry for network threat detection. The ...
... Ratio, Residual Inter Symbol Interference, PAM4 Level
Transition Parameters, and other parameters supported on optics interfaces.
Using the Performance Monitoring feature allows eos to collect and maintain ...
... clusters. This means the directly connected
TaskTracker nodes can belong to different clusters. eos supports a maximum of five
clusters per switch.
MapReduce Tracer Configuration
The MapReduce Tracer ...
VM Tracer
This chapter describes VM Tracer configuration and usage and contains these sections:
Introducing VM Tracer
VM Tracer Description
VM Tracer Configuration Procedures
VM Tracer ...
... manager can request or change. The agent gathers data from the MIB and responds to requests for information. For a list of supported MIBs, refer to the release notes for the specific eos version.
This ...
...
sFlow exports packet samples and topology meta data to a centralized collector
application.
sFlow scales and operates on all switch ports simultaneously.
eos implements sFlow on all switches, without ...
... template interval 3400000
Hardware Flow Tracking with IPFIX Export
Hardware Flow Tracking uses match criteria to collect data from packets based on defined
flow profiles. eos sends the collected ...
Latency Analyzer (LANZ)
Arista Networks’ Latency Analyzer (LANZ) is a family of eos features that provide enhanced
visibility into network dynamics, particularly in areas related to the delay packets
experience ...
... timestamp
Drop count
Device ID
Egress
interface
FCS type
Reserved
TAP Aggregation Extra MPLS Pop (4 to 6 Labels)
Available starting with eos Release 4.23.1F extra MPLS pop for TAP
Aggregation ...
Visibility and Monitoring Services
The Visability and Monitors Services chapter contains the following sections:
Test Access Point Aggregation
Latency Analyzer (LANZ)
Sampled Flow Tracking
sFlow ...
Configuring RSVP-TE
The configuration of RSVP-TE requires the configuration of one or more of the following:
Configuring RSVP-TE LER
Configuring RSVP-TELSR
Configuring RSVP-TE P2MP LER ...
LDP over RSVP
LSPs formed by LDP normally follow IGP routing. The LDP speaker selects the downstream
LSR for a particular prefix as the LDP peer that advertises it with the best IGP metric
using ...
Resource Reservation Protocol for Traffic Engineering (RSVP-TE)
The Resource Reservation Protocol for Traffic Engineering (RSVP-TE) distributes
Multiprotocol Label Switching (MPLS) labels for steering ...
... this example, eos sends hello messages to all known neighbors every
10 seconds. If the switch does not receive
hello responsesfrom a neighbor for 4*10=40 seconds, the switch loses
communication and the ...
LDP Pseudowire
LDP pseudowire provides support for emulating Ethernet connections over a
Multiprotocol Label Switching (MPLS) network, and controlled using the extension of the MPLS
Label Distribution ...
... require the customer routes have them.
eos achieves the above through the extensions to BGP as defined in RFC 4364 for IPv4
and RFC 4659 for IPv6, and the use of VPN Routing and Forwarding Tables (VRFs),
Route ...
... a GRE tunnel, the payload of the outgoing GRE packet contains the payload of
the incoming source packet starting from the MPLS header. eos
strips L2 and outer L3 headers from the mirror copy. When the
MPLS ...
Multiprotocol Label Switching (MPLS)
Tunneling protocols encapsulate packets of a different protocol as the payload of a
larger frame for delivery within networks utilizing the encapsulating protocol.
Tunneling ...
EVPN and VCS Commands
Global Configuration Mode
router
general
Router BGP Configuration Mode
next-hop
resolution disabled
redistribute
service vxlan
route-target
route-target
export
route-target ...