Total 50 results found for the keyword of "eos section 35 5 is is commands"
... this example, eos sends hello messages to all known neighbors every
10 seconds. If the switch does not receive
hello responsesfrom a neighbor for 4*10=40 seconds, the switch loses
communication and the ...
EVPN and VCS commands
Global Configuration Mode
router
general
Router BGP Configuration Mode
next-hop
resolution disabled
redistribute
service vxlan
route-target
route-target
export
route-target ...
VXLAN commands
VXLAN Global Configuration
commands
interface vxlan
ip address virtual
vxlan vni notation
dotted
VXLAN Interface Configuration
commands
vxlan flood vtep
vxlan multicast-group ...
Upgrade/Downgrade commands
install
reload fast-boot
reload hitless
install
The install
command copies the specified eos image onto the switch if the source is
external, configures the ...
Environment commands
Environment Control
Configuration commands
environment fan-speed
environment insufficient-fans action
environment overheat action
locator-led
Environment Display
commands ...
Precision Time Protocol (PTP) commands
PTP commands
ptp announce interval
ptp announce timeout
ptp delay-mechanism
ptp delay-req interval
ptp domain
ptp enable
ptp forward-v1
ptp hold-ptp-time ...
7130 Layer 1 commands
Layer 1 Configuration commands
l1 source
Layer 1 Show commands
show l1 destination
show l1 matrix
show l1 path
show l1 source
show l1 source
capabilities
l1 ...
Session Management commands
Global Configuration commands
commit timer
configure replace
configure session
management api eos-sdk-rpc
management api external-services
management api gnmi
management ...
... Nexthop groups supports configuring the backup paths through eos RPC APIs and CLI. Whenever the route or prefix begins pointing to configured backup paths, the event monitor database logs a backup activation ...
... the password from the encrypted string. If the
clear-text password is lost, delete the corresponding
PASSWORD command line from the
boot-config file.
Note:
The eos boot secret command adds or
modifies ...
... not know the current settings, restore the factory default
settings described in Restoring the Factory Default eos Image and Startup Configuration.
The no boot console and default boot console commands ...
... vrf purple
switch(config-mc-vrf-purple)# host cloudserver
client interval
The client interval command configures the interval between probes on a client. By default, eos sets the interval ...
... can be enabled or disabled on the
fly without impacting regular packet forwarding functionality.
NDR Switch Sensor Extension
NDR switch sensor extends eos telemetry for network threat detection. The ...
... Ratio, Residual Inter Symbol Interference, PAM4 Level
Transition Parameters, and other parameters supported on optics interfaces.
Using the Performance Monitoring feature allows eos to collect and maintain ...
... clusters. This means the directly connected
TaskTracker nodes can belong to different clusters. eos supports a maximum of five
clusters per switch.
MapReduce Tracer Configuration
The MapReduce Tracer ...
VM Tracer
This chapter describes VM Tracer configuration and usage and contains these sections:
Introducing VM Tracer
VM Tracer Description
VM Tracer Configuration Procedures
VM Tracer ...
... manager can request or change. The agent gathers data from the MIB and responds to requests for information. For a list of supported MIBs, refer to the release notes for the specific eos version.
This ...
...
sFlow exports packet samples and topology meta data to a centralized collector
application.
sFlow scales and operates on all switch ports simultaneously.
eos implements sFlow on all switches, without ...
... template interval 3400000
Hardware Flow Tracking with IPFIX Export
Hardware Flow Tracking uses match criteria to collect data from packets based on defined
flow profiles. eos sends the collected ...
Latency Analyzer (LANZ)
Arista Networks’ Latency Analyzer (LANZ) is a family of eos features that provide enhanced visibility into network dynamics, particularly in areas related to the delay packets ...