Total 14 results found for the keyword of "eos section 48 3 sflow configuration commands"
47.3 sflow configuration commands This section contains descriptions of sflow commands. Global configuration commandssflow extension bgp • sflow extension router • sflow extension switch • sflow ...
47.2 sflow configuration Procedures Implementing sflow on an Arista switch consists of configuring the following agent parameters: 1. Collector location address. 2. Agent source address. 3. Polling interval. ...
... type pdp command and its associated configuration. Note PDP is available only in eos versions 4.19.0F and above. Command Mode Global configuration Command Syntax policy-map type pdp [shared] map_name no ...
47.1 sflow Conceptual Overview 47.1.1 sflow Technology sflow is a multi-vendor sampling technology that continuously monitors application level traffic flow at wire speed simultaneously on all interfaces. ...
30.2 Traffic Management configuration – Arad Platform Switches Traffic policies are implemented by policy maps, which are applied to the control plane, or to L3 interfaces for Policy-Based Routing (PBR). ...
30.3 Traffic Management configuration – FM6000 Platform Switches Traffic policies are implemented by policy maps, which are applied to the control plane or an interface. Policy maps contain classes, which ...
30.5 Traffic Management configuration – Trident Platform Switches Traffic policies are implemented by policy maps, which are applied to the control plane or an interface. Policy maps contain classes, which ...
30.6 Traffic Management configuration – Trident II Platform Switches Traffic policies are implemented by policy maps, which are applied to the control plane or an interface. Policy maps contain classes, ...
sflow This chapter describes Arista’s implementation of sflow, including configuration instructions and command descriptions. Topics covered by this chapter include: • section 47.1: sflow Conceptual ...
46.4 MapReduce Tracer Command Descriptions Global configuration commands • monitor hadoop Clear Hadoop Monitor commands • clear monitor hadoop burst-counters • clear monitor hadoop job-history Display ...
... for configuring IPv4, IPv6, and MAC access lists and then updating a monitor session with corresponding configuration changes. eos mirrors the packets that match permit statements. eos does not select ...
11.4 Interfaces Arista switches provide two physical interface types that receive, process, and transmit Ethernet frames: Ethernet interfaces and Management interfaces. Each Ethernet interface is assigned ...
OpenFlow This chapter describes Arista’s OpenFlow implementation. sections in this chapter include: • section 48.1: OpenFlow Introduction • section 48.2: OpenFlow Description • section 48.3: OpenFlow ...
... for configuring IPv4, IPv6, and MAC access lists and then updating a monitor session with corresponding configuration changes. eos mirrors the packets that match permit statements. eos does not select ...