Total 20 results found for the keyword of "eos section 6 1 managing the switch name"
... device: switch (DCS-7150S-64-CL, eos-4.13.2F) ! vlan 3-4 ! username john secret 5 $1$a7Hjept9$TIKRX6ytkg8o.ENja.na50 ! hostname sales1 ip name-server vrf default 172.17.0.22 dns domain samplecorp.org ! end switch#  ...
managing eos Extensions the most simple and efficient way to make the most of the extensibility on which eos is built is through the use of extensions. An extension is a pre-packaged optional feature ...
... sections: managing the switch name System Clock and Time Protocols managing Display Attributes Logging of Event Notifications Event Monitor managing eos Extensions switch Administration Commands ...
... full10G Not Present Et4/7 connected1 full10G Not Present Et4/8 connected1 full10G Not Present Et4/9 connected1 full10G Not Present switch> Referencing Multi-lane Ports eos supports two types of ...
...  This command replaces the EOS CLI prompt with an SQLite prompt.switch#event-monitor interact sqlite> This command exits SQLite and returns to the EOS CLI prompt.sqlite> .quit switch# event-monitor ...
... the eos image on your ZTP server by confirming that its MD5 checksum matches the MD5 checksum that can be found on the eos download page of the Arista website. On a UNIX server, the md5sum command calculates ...
... point for eos commands. the prompt command configures the contents of the prompt. the no prompt command returns the prompt to the default of %H%P. Characters allowed in the prompt include A-Z, a-z, 0-9, ...
... eos version. This chapter discusses enabling the SNMP agent on an Arista switch and controlling notification transmissions from the agent. Information on using SNMP management systems is available in ...
...  TAP Aggregation QoS Handling on TAP Ports Before eos 4.20.5F, QoS behavior was not enforced for TAP aggregation ports, meaning that QoS behavior for packets passing through the device was not ...
Multicast Source Discovery Protocol (MSDP) Multicast Source Discovery Protocol (MSDP) describes a topology that connects multiple IPv4 Protocol Independent Multicast Sparse-Mode (PIM-SM) domains. ...
... distributes operational state information across a set of eos switches to support applications that provide network services. See the CloudVision User Guide, https://www.arista.com/en/support/product-documentation, ...
... mode as shown below. (config)# management ssh (config-mgmt-ssh)# ip access-group [vrf ] in (config-mgmt-ssh)# ipv6 access-group [vrf ] in In eos 4.19.0, all VRFs are required to use the same ...
...  MACsec encryption is a eos licensed feature. A valid MACsec license must be configured on a switch. MACsec licenses are tied to a switch serial number and the licensee. Every switch running MACsec ...
... (also configured as a dynamic LAG) on the partner switch. the maximum number of ports per LAG varies by platform; numbers for each platform in the latest eos release are available here: https://www.arista.com/en/support/product-documentation/supported-features. ...
... behavior. Note: It is highly recommended that both MLAG peer switches are identical platforms and run identical eos images. Running different images/platform may result in a failure to form an association ...
...  Authentication, Authorization, and Accounting Overview This section contains the following topics: Methods Configuration Statements Encryption Methods the switch controls access to eos ...
Event Monitor the event monitor writes system event records to local files for access by SQLite database commands. Note: Beginning with release eos-4.20.5F, event-monitor is not enabled by default. ...
... of the time source or, if that source has an IPv6 address, the first four octets of the MD5 hash of that IPv6 address. In eos releases prior to 4.23.2, show ntp status identified the system peer by  ...
Logging of Event Notifications Arista switches log event notifications using the Syslog protocol. By default, event notifications are logged internally to /var/log/messages, but they can also be displayed on ...
... of the CLI. This chapter includes these sections: Accessing the eos CLI Processing Commands Kernel-based Virtual Machine Commands and Configuration switch Platforms Command Modes managing ...