Total 43 results found for the keyword of "eos section 6 4 system reset"
... be accessed only through the console port, and the command set is
limited. Any configuration changes made on the standby supervisor will
be lost when the supervisor reboots.
Note: When upgrading the eos ...
... Operation
When the switch is powered on or rebooted, Aboot reads its configuration from
boot-config on the internal flash and attempts
to boot an eos software image (with the extension
.swi) automatically ...
... 1
stop bit. If you do not know the current settings, restore the factory-default
settings as described in Restoring the Factory Default eos Image and Startup Configuration.
The no boot console and default ...