Total 10 results found for the keyword of "eos section 6 7 switch administration commands"
...
This command replaces the EOS CLI prompt with an SQLite
prompt.switch#event-monitor interact
sqlite>
This command exits SQLite and returns to the EOS CLI
prompt.sqlite> .quit
switch#
event-monitor ...
Managing eos Extensions
The most simple and efficient way to make the most of the extensibility on which eos is built is
through the use of extensions. An extension is a pre-packaged optional feature ...
... sections:
Managing the switch Name
System Clock and Time Protocols
Managing Display Attributes
Logging of Event Notifications
Event Monitor
Managing eos Extensions
switch administration
commands ...
... device: switch (DCS-7150S-64-CL, eos-4.13.2F)
!
vlan 3-4
!
username john secret 5 $1$a7Hjept9$TIKRX6ytkg8o.ENja.na50
!
hostname sales1
ip name-server vrf default 172.17.0.22
dns domain samplecorp.org
!
end
switch#
...
... eos version.
This chapter discusses enabling the SNMP
agent on an Arista switch and controlling notification transmissions
from the agent. Information on using SNMP management systems is available
in ...
... full10G Not Present
Et4/7 connected1 full10G Not Present
Et4/8 connected1 full10G Not Present
Et4/9 connected1 full10G Not Present
switch>
Referencing Multi-lane Ports
eos supports two types of ...
...
Authentication, Authorization,
and Accounting Overview
This section contains the following topics:
Methods
Configuration Statements
Encryption
Methods
The switch controls access to eos ...
Event Monitor
The event monitor writes system
event records to local files for access by SQLite database commands.
Note:
Beginning with release eos-4.20.5F, event-monitor is not enabled by default. ...
... of the time source or,
if that source has an IPv6 address, the first four octets of the MD5 hash of that IPv6 address.
In eos releases prior to 4.23.2, show ntp status identified the system peer by
...
... point for eos commands. The prompt command configures the contents of the prompt. The no prompt command returns the prompt to the default of %H%P.
Characters allowed in the prompt include A-Z, a-z, 0-9, ...