Total 6 results found for the keyword of "eos section 8 5 upgradedowngrade commands"
Upgrade/Downgrade commands
install
reload fast-boot
reload hitless
install
The install
command copies the specified eos image onto the switch (if the source is
external), configures ...
Upgrades and Downgrades
This chapter describes the
procedures for upgrading or downgrading the switch software.
This chapter contains these sections:
Upgrade/Downgrade Overview
Accelerated Software ...
... tasks (including copying the eos image) before
rebooting the control plane
forwarding packets in hardware (based on the last known state) while the
control-plane is offline
optimizing the boot process ...
... the eos image with Smart System
Upgrade
Using SSU to upgrade the active
eos image is a five-step process:
Prepare switch for upgrade ( Prepare the Switch for SSU).
Transfer image file to the switch ...
Standard Upgrades and Downgrades
Standard software upgrades
and downgrades on Arista switches are accomplished by installing a different
eos image and reloading the switch. On switches with redundant ...
Security
The Security chapter contains the following sections:
User Security
AAA Configuration
Control Plane Security
Transport Layer Security
802.1X Port Security
Data Plane Security
IP NAT ...