Wall Mount the O-105

Mounting the access point (AP) on the wall consists of the following steps:

  1. Affix the expansion bolts on the wall such that the holes on the mounting base can be perfectly placed over them.
    Table 1. Labels: Dimensions
    Label Description
    1 Horizontal distance between holes: 50mm
    2 Vertical distance between holes: 84mm
    3 Diameter of the hole: 6.5mm, depth 30mm
  2. Attach the mounting base to the bottom cover of the O-105 device.
    Table 2. Labels: Parts
    Label Description
    1 Philips #2 screwdriver. Length >= 100mm
  3. Mount the device on the expansion bolts.