Total 6 results found for the keyword of "eos section 24 4 qos configuration jericho platform switches"
eos 4.34.0F User Manual - Test Access Point Aggregation
... timestamp Drop count Device ID Egress interface FCS type Reserved TAP Aggregation Extra MPLS Pop (4 to 6 Labels) Available starting with eos Release 4.23.1F extra MPLS pop for TAP Aggregation ...
eos 4.34.0F User Manual - Bidirectional Forwarding Detection
... offers an echo function. eos supports asynchronous mode and the echo function. Asynchronous Mode Demand Mode Asynchronous Mode In asynchronous mode, BFD control packets are exchanged by neighboring ...
eos 4.34.0F User Manual - IPv4
... arp 172.22.30.52 0025.900e.c63c arpa switch(config)# The arp proxy max-delay command enables delaying proxy ARP requests on the configuration mode interface. eos disables Proxy ARP by default. When ...
eos 4.34.0F User Manual - Traffic Management
... SR Policy IdentificationThe following identifies an SR policy. Endpoint - An IPv4 or IPv6 address which refers to the destination of the policy. eos allows 0/0 and 0:: and calls these IP addresses null ...
eos 4.34.0F User Manual - Ethernet Ports
... command for shutting down the Tx output path for unidirectional mode. 1-second update of pre-FEC BER, OSNR, ESNR. 400GBASE-ZR transceiver with Open Forward Error Correction (O-FEC) (eos release 4.25.2F.) ...
eos 4.34.0F User Manual - Quality of Service
Quality of Service This chapter describes the eos Quality of Service (qos) implementation, including configuration instructions and command descriptions. Topics covered by this chapter include ...