- Written by Pauric Ward
- Posted on August 23, 2022
- Updated on September 12, 2022
- 677 Views
Stale routes are learned routes from adjacent BGP neighbors whose neighborship has been interrupted by session instability. This feature adds a mechanism to specify a stale policy route-map for which the stale routes from a gracefully restarting, or depending on the configuration of the feature, a non-gracefully restarting BGP peer will be processed.
- Written by Paraic Gallagher
- Posted on October 28, 2020
- Updated on October 28, 2020
- 1781 Views
This feature adds a configuration option which provides a CLI error if a reference is made to an unconfigured policy
- Written by Pawel Kurdybacha
- Posted on February 16, 2021
- Updated on February 16, 2021
- 1990 Views
The feature allows assigning of class E addresses to interfaces by default with no option to turn that off and routing
- Written by Azad Kumar
- Posted on January 3, 2023
- Updated on January 3, 2023
- 180 Views
ISIS Leaked Route Summarization is a feature which summarizes all the L1 leaked routes in L2 routers. With the help of this L2 LSP size reduces (smaller no of routes in L2 LSP).
- Written by Bin Wang
- Posted on December 22, 2020
- Updated on December 22, 2020
- 1925 Views
For various peering applications, there is a need to support the assignment of a MAC address on routed interfaces.
- Written by Ryan Halbrook
- Posted on June 28, 2021
- Updated on June 28, 2021
- 2014 Views
Multipath color is a new multicast multipath mode for controlling PIM RPF selection. In the default multipath
- Written by Lavanya Conjeevaram
- Posted on March 31, 2017
- Updated on April 3, 2017
- 1912 Views
Overlay IPv6 routing over VXLAN Tunnel is simply routing IPv6 packets in and out of VXLAN Tunnels, similar to
- Written by David Cronin
- Posted on March 3, 2022
- Updated on January 11, 2023
- 2003 Views
This document describes a new CLI command to help debug how and why policy permits and denies paths. The aim of this CLI command is for the user to debug a route map or RCF function by specifying as input a prefix for which BGP has reachability for, either via a BGP peer or a redistribute source.
- Written by Shyam Kota
- Posted on January 22, 2019
- Updated on January 22, 2019
- 1740 Views
RIB Route Control is a collection of mechanisms for controlling how IP routing table entries get used. Next hop
- Written by Sharad Birmiwal
- Posted on November 4, 2020
- Updated on February 11, 2022
- 6150 Views
Routing control functions (RCF) is a new language that can be used to express BGP route filtering and attribute
- Written by David Cronin
- Posted on March 3, 2022
- Updated on January 13, 2023
- 3562 Views
Routing control functions (RCF) is a language that can be used to express route filtering and attribute modification logic in a powerful and programmatic fashion.
This document serves as a reference guide for
- Written by David Cronin
- Posted on March 3, 2022
- Updated on January 11, 2023
- 2585 Views
Routing Control Functions (RCF) is a language that can be used to express route filtering and attribute modification logic in a powerful and programmatic fashion.
- Written by Shamit Kapadia
- Posted on May 3, 2022
- Updated on January 11, 2023
- 1359 Views
Routing Control Functions (RCF) is a language that can be used to express route filtering and attribute modification logic in a powerful and programmatic fashion.
- Written by Roger Levesque
- Posted on January 3, 2023
- Updated on January 11, 2023
- 158 Views
Routing control functions (RCF) is a language that can be used to express route filtering and attribute modification logic in a powerful and programmatic fashion.
- Written by David Cronin
- Posted on March 4, 2022
- Updated on January 11, 2023
- 2764 Views
Routing control functions (RCF) is a language that can be used to express route filtering and attribute modification logic in a powerful and programmatic fashion.
- Written by Shamit Kapadia
- Posted on May 3, 2022
- Updated on June 2, 2022
- 1337 Views
Routing Control Functions (RCF) is a language that can be used to express route filtering and attribute modification logic in a powerful and programmatic fashion.
- Written by Neil Jarvis
- Posted on March 2, 2022
- Updated on January 5, 2023
- 1896 Views
A L2 sub-interface is a logical bridging endpoint associated with traffic on an interface distinguished by 802.1Q tags, where each <interface, 802.1Q tag> tuple is treated as a first-class bridging interface.
- Written by Harish Prabhu
- Posted on March 31, 2017
- Updated on April 3, 2017
- 1933 Views
In EOS 4.18.0F, VXLAN direct routing was introduced on the 7500R and 7280E/R series platforms. VXLAN routing