Total 10 results found for the keyword of "eos 8 3 configuring and viewing environment settings"
... Command: show running-config
! device: switch (DCS-7150S-64-CL, eos-4.13.2F)
ip route 0.0.0.0/0 10.255.255.1
!
environment overheat action ignore
!
!
end
switch#
Insufficient Fans
The switch can ...
Switch environment Control
The following sections describe the commands that display temperature, fan, and power supply
status:
environment Control Introduction
environment Control Overview
configuring ...
environment Control Overview
This section contains the following topics:
Temperature
Fans
Power
Temperature
Arista switches include internal temperature sensors. The number and location ...
environment Commands
environment Control
Configuration Commands
environment fan-speed
environment insufficient-fans action
environment overheat action
locator-led
environment Display
Commands ...
...
Drop count
Device ID
Egress interface
FCS type
Reserved
TAP Aggregation Extra MPLS Pop (4 to 6 Labels)
Available starting with eos Release 4.23.1F extra MPLS pop for TAP Aggregation ...
Latency Analyzer (LANZ)
Arista Networks’ Latency
Analyzer (LANZ) is a family of eos features that provide enhanced visibility
into network dynamics, particularly in areas related to the delay packets
experience ...
... for OSPFv2 adjacencies with DR Other neighbors.
OSPFv2 Multiple Instances Support
eos Release 4.22.1F adds support for multiple OSPFv2 instances to
be configured in the default VRF. OSPFv2 Multiple ...
... area and interface levels.
Note: On the same area or interface, eos allows security configuration with either AH or ESP but not both. We can have one area or interface configured with AH and another ...
... hop resolution semantics of BGP routes with an ordered list, or profile, of resolution RIB domains (for example, either tunnel or IP domain). This allows eos to direct specific services over the specified ...
... CLI.
This chapter includes these sections:
Accessing the eos CLI
Processing Commands
Kernel-based Virtual Machine Commands and Configuration
Switch Platforms
Command Modes
Managing Switch
Configuration ...