Total 7 results found for the keyword of "eos section 37 2 bfd configuration"
Sample configurations EVPN VXLAN IRB Sample configuration In the topology below, we are connecting a Layer 2 site with a Layer 3 site using Layer 3 EVPN (type-5 route). Right side leaves are MLAG ...
... of routes will result in data loss. This can be prevented by configuring graceful restart on the device. When IS-IS is used as the interior gateway protocol (IGP), the following eos features require nonstop ...
... packets. The basic behavior of bfd is defined in RFC 5880. bfd Modes bfd functions in asynchronous or demand mode, and also offers an echo function. eos supports asynchronous mode and the echo ...
Protocol Independent Multicast Protocol Independent Multicast (PIM) distributes multicast data using routes gathered by other protocols. Arista switches support two types of PIM: PIM Sparse Mode (PIM-SM) ...
... distributes operational state information across a set of eos switches to support applications that provide network services. See the CloudVision User Guide, https://www.arista.com/en/support/product-documentation, ...
... mode as shown below. (config)# management ssh (config-mgmt-ssh)# ip access-group [vrf ] in (config-mgmt-ssh)# ipv6 access-group [vrf ] in In eos 4.19.0, all VRFs are required to use the same ...
... are assigned to Ethernet interfaces. Note: PDP is available only in eos versions 4.19.0F and above. A policy map consists of classes. Each class contains an eponymous class map and traffic resolution ...