- Written by Travis Hammond
- Posted on December 29, 2021
- Updated on December 29, 2021
- 4318 Views
TCAM features matching on the same packet type and executing the same action are implicitly prioritized if both are
- Written by Tanuj Kumar Jhamb
- Posted on February 22, 2022
- Updated on March 3, 2022
- 3776 Views
This feature allows the user to match the 20 bit IPV6 flow label using the Qos Policy Map and allows to classify the flow-label controlled traffic.
- Written by Tanuj Kumar Jhamb
- Posted on April 18, 2022
- Updated on June 2, 2022
- 3281 Views
The flow-label match for QoS policy map can be achieved by using the TCAM profile “qos-match-ipv6-flow-label” which is available from EOS 4.27.2F onwards.
- Written by Yashvir Singh
- Posted on March 2, 2021
- Updated on June 19, 2023
- 4931 Views
This feature allows classification of packets on QoS policy-maps based on the Class of Service (CoS), VLAN, Drop Eligible Indicator (DEI) in the 802.1q header of the packet. CoS (Class of Service) corresponds to the Priority code point (PCP) bits in the 802.1q header.
- Written by Mattar Amith Kini
- Posted on March 6, 2020
- Updated on July 6, 2022
- 4207 Views
This feature allows classification of packets based on the inner VLAN value along with the VLAN and CoS bits in a double tagged packet.
- Written by Ashish Goyal
- Posted on June 29, 2023
- Updated on July 11, 2023
- 1677 Views
This feature enables Qos policy-maps to match on IPv4/IPv6 fields for L3VPN & 6PE services on the LER device core facing interface, assuming all labels are popped and packets are sent to the customer as IP.
- Written by Tanuj Kumar Jhamb
- Posted on December 16, 2021
- Updated on September 2, 2022
- 4317 Views
This feature allows the user to configure upto 1023 unique QoS Policy-maps per chip.