Tag :: Shaping

This document describes the introduction and use of the global knob which facilitates the txQueue percentage-based allocations based on the available bandwidth of the parent interface.

L2 protocol packets - LLDP, LACP and STP are trapped to the CPU by default. This feature allows for disabling the per protocol trap on a given set of interfaces.

Subinterfaces divide a single ethernet or port channel interface into multiple logical L2 or L3 interfaces based on the 802.1q or 802.1ad tags of incoming traffic. Subinterfaces are commonly used in the L2/L3 boundary device, but they can also be used to isolate traffic with 802.1q tags between L3 peers by assigning subinterfaces to different VRFs or different L2 bridging domains.

This feature is only applicable to shaped port-channel subinterfaces. Traffic destined to a shaped port-channel subinterface would be load-balanced across all members of the port-channel. Shaping configured on the port-channel subinterface will be directly used across all the members of port-channel. Load-balancing criterion for flows destined to a shaped port-channel subinterface is the same as parent port-channel load-balancing criterion. Each shaped port-channel subinterface consumes as many SPPID (System physical port identifier) as the number of members added to the port-channel along with one extra port-channel resource (LAG ID) to combine all these SPPID. Anchor based approach is default behavior and we explicitly need to enable and reload the system for this feature to work.