Tag :: 4.26.0F

This TOI details the following feature additions:. Support of 4x100G mode for the 400GBASE ZR transceivers

This feature supports to upgrade Aboot firmware via an Aboot Update File (AUF). The aim is to be able to provide a signed

This feature detects duplicate IP addresses configured on the switch already owned by hosts the switch has already

In older EOS releases the ingress interface was always included in LAG hash calculations input together with other

This feature allows a Data Center (DC) operator to incrementally migrate their VXLAN network from IPv4 to IPv6

ALPM (Algorithmic Longest Prefix Management) is a scheme in which the route prefix is split and stored across DEFIP

Multihoming in EVPN allows a single customer edge (CE) to connect to multiple provider edges (PE or tunnel endpoint).

The  Inband Network Telemetry eXport Data (INT XD) feature is used to gather flow, queue, drop telemetry

4.26.0F adds Latency ANalyZer (LANZ) support to the Arista 7170 series. LANZ monitors the egress queue usage through

The MPLS ping/traceroute utilities were extended in EOS version 4.26.0F to support connectivity checking of BGP

Media Access Control Security (MACsec) is an industry standard encryption mechanism that protects all traffic

Media Access Control Security (MACsec) is an industry standard encryption mechanism that protects all traffic

The `ptp forward-v1` command configures the switch to forward Precision Time Protocol version 1 packets as regular multicast traffic. By default, when PTP is enabled and PTPv1 packets are received on the PTP enabled interfaces, these packets are trapped by the CPU, logged and discarded.

In EOS, BGP creates different update groups based on the outbound configuration. Different route maps or Routing

When an interface is overloaded with packets and goes beyond its buffering capabilities, packet drops become

This feature adds support for streaming the output of the following show command in Octa:. The

This feature adds TLS support to the existing syslog logging mechanism. With the new added CLI commands, the user can

This article describes how to customize TCAM ( Ternary Content Addressable Memory ) lookup for each feature which uses TCAM.

This feature allows selecting Differentiated Services Code Point (DSCP) and Traffic Class (TC) values for packets at VTEPs along VXLAN encapsulation and decapsulation directions respectively. DSCP is a field in IP Header and TC is a tag associated with a packet within the switch, both influence the Quality of Service the packet receives. This feature can be enabled via configuration as explained later in this document.