Parts List
This section lists the installation parts contained in the switch accessory kit.
Each switch provides an accessory kit that contains parts that are required to install the switch. Four-post rack mount is recommended for all switches. Use the rack-mount parts included with your switch for mounting. Rails from different kit SKUs may look similar but could be incompatible for use with extension kits for longer switches. Depending on the PSU, C13/14, C19/20 or SAF-D type power cables are included in the accessory kit.
Note: Use only the components shipped with the switch or compatible replacement parts.
The following topics are covered in this section:
Accessory Kits
This section describes the components included with the accessory kits available with the switches. Not all kits are shipped with all switches. Use only the parts shipped with the switch or optional, compatible kits. Do not mix parts from incompatible kits such as KIT-7001/2 and KIT-7101/2.
KIT-7203
The kit supports rack depths of twenty-two to thirty-two inches for four-post rack mounting of 2-4RU switches.
| Assembly Part Number | Description | Quantity |
|---|---|---|
| Four-post brackets | 2 | |
| SAF-D GRID - IEC-320/C20, 16A, 250V Cable, 2 meter | 2 | |
| RJ45 Patch Panel Cable, 2 meter | 1 | |
| RJ45 to DB9 Adapter Cable, 2 meter | 1 | |
| Identity tag | 1 | |
| ASY-06132 | Rack ear with captive thumb screw | 2 |
| ASY-03765 | Front rack shelf with guide block | 2 |
| ASY-03767 | Rear rack shelf with guide block | 2 |
Cables
Lists the cables required for the installation of the switches.
Note: Use only the power cables shipped with your switch.
| Quantity | Description |
|---|---|
| 2 | Power cables: SAF-D GRID - IEC-320/C20, 16A, 250V Cable, 2 meter |
| 2 | Power cables: IEC-320/C19-C20, 16 A, 250 V, 2 m |
| 1 | RJ-45 Patch Panel Cable |
| 1 | RJ-45 to DB9 Adapter Cable |
Warning:
All provided power cables are for use only with Arista products.
Ground Extender Kit (Optional)
Lists the cables required for the installation of the device.
1. Compatible with specific devices.
| SKU | Description |
|---|---|
| KIT-GND-EXT-2RU1 | Ground extender kit for NEBS compliance |