- Written by Sandeep Betha
- Posted on January 31, 2022
- Updated on September 15, 2023
- 4292 Views
PIM External Gateways (PEGs) allow an EVPN overlay multicast network to interface with an external PIM domain. They can be used to interconnect two data centers using an external PIM domain in between them.
- Written by Sandeep Betha
- Posted on January 22, 2021
- Updated on February 6, 2022
- 5243 Views
This feature adds support for user configured BGP Nexthop Resolution RIB profiles for various BGP based services
- Written by Sandeep Betha
- Posted on June 4, 2020
- Updated on June 4, 2020
- 2851 Views
Current EOS PIM sparse mode implementation installs an (S, G) route in the hardware whenever it receives an (S, G) join
- Written by Sandeep Betha
- Posted on April 21, 2020
- Updated on April 27, 2020
- 3541 Views
In the ribd routing protocol model, the “maximum paths … ecmp …” command allows restricting the number of BGP
- Written by Sandeep Betha
- Posted on December 18, 2019
- Updated on December 16, 2021
- 3638 Views
MLDv2 Snooping optimizes the transmission of multicast packets in Layer 2 by using Layer 3 information contained in
- Written by Sandeep Betha
- Posted on October 22, 2018
- Updated on October 22, 2018
- 3541 Views
This feature allows service providers to interconnect IPv6 sites over a Multiprotocol Label Switching (MPLS)
- Written by Sandeep Betha
- Posted on May 1, 2015
- Updated on May 1, 2015
- 2684 Views
This feature adds support for standard BGP GSHUT (0xFFFF0000) community. GSHUT community is the community used in
- Written by Sandeep Betha
- Posted on May 1, 2015
- Updated on May 1, 2015
- 2747 Views
The "set as path prepend" clause in the config route map mode is enhanced to accept the "auto" keyword. The "auto"