- Written by Quentin L'Hours
- Posted on December 23, 2019
- Updated on December 23, 2019
- 8549 Views
In the multi agent routing protocol model, the Bgp agent now supports matching community lists with a logical OR via
- Written by Sandeep Betha
- Posted on January 22, 2021
- Updated on February 6, 2022
- 11571 Views
This feature adds support for user configured BGP Nexthop Resolution RIB profiles for various BGP based services
- Written by Charles Gibert
- Posted on June 13, 2019
- Updated on June 13, 2019
- 7402 Views
The “set as path prepend” clause in route map configuration mode has been enhanced with the addition of
- Written by Paraic Gallagher
- Posted on October 28, 2020
- Updated on October 28, 2020
- 7081 Views
This feature adds a configuration option which provides a CLI error if a reference is made to an unconfigured policy
- Written by Arpit Bansal
- Posted on August 18, 2020
- Updated on August 18, 2020
- 7308 Views
Level 1 2 routers set attached bit in their Level 1 LSPs to indicate their reachability to the rest of the network. A
- Written by Sharad Birmiwal
- Posted on February 3, 2022
- Updated on February 3, 2022
- 9132 Views
The "set metric" clause in a route map sequence has been enhanced with the addition of the "igp nexthop cost" keyword.
- Written by Deeksha Srivastava
- Posted on March 12, 2020
- Updated on March 16, 2020
- 7124 Views
This feature adds support for ‘match interface’ clause under route map config for Bgp policy application in
- Written by Robert Van Dijk
- Posted on August 20, 2020
- Updated on September 4, 2020
- 6967 Views
This feature adds support for ‘match ip(v6) resolved next hop’ clause under route map config for BGP policy
- Written by David Cronin
- Posted on August 26, 2019
- Updated on October 25, 2021
- 9142 Views
This document describes a new CLI command to help debug how and why route maps permit and deny paths. The aim of this CLI
- Written by Nikhil Satish Pai
- Posted on December 7, 2020
- Updated on December 9, 2020
- 7170 Views
This feature adds support for the match ospf instance <instanceID> clause under the route map config.
- Written by James Doherty
- Posted on October 28, 2020
- Updated on October 28, 2020
- 6539 Views
4.25.0F adds support to use large community lists in the ‘set large community’ route map set clause.