- Written by Dragos Maftei
- Posted on August 18, 2020
- Updated on August 19, 2020
- 13113 Views
This feature adds a CLI knob to allow disabling the ENTITY STATE traps entStateOperEnabled &
- Written by Zeyad Tamimi
- Posted on March 3, 2023
- Updated on July 29, 2026
- 16043 Views
At a high level, L1 profiles are a set of configurations which allow EOS users to change the numbering scheme and default L1 configurations of all front panel interfaces across their network switch. On Arista network switches, front panel transceiver cages are exposed as ports which are numbered sequentially: 1, 2, 3, 4, etc. These identifiers are usually marked on the front panel to allow for easier identification.
- Written by Deepak Sebastian
- Posted on September 11, 2026
- Updated on September 11, 2026
- 2 Views
On Arista 7130 devices, the transmit and receive paths of front panel Ethernet interfaces are inherently independent. An interface can have a fully operational transmit path while the receive is down, yet the existing show interfaces output only displays a single combined link status. This can cause confusion when the interface state shows "down" even though the TX path is actively passing traffic.